Barebones E11
Ok guys here are some pic of the bulldozer sorry about the quality I was in a hurry but I will get better ones. I'm working on this with my dad at his shop we are going to start with the tracks and carring rollers
http://i1379.photobucket.com/albums/...psqugqntla.jpg http://i1379.photobucket.com/albums/...pssyhcghwd.jpg http://i1379.photobucket.com/albums/...psahe68edn.jpg |
Re: Barebones E11
I am a lil confused after checking their website out the Pics above look a lil short of what they advertise on their site as far as the quality of workmanship you get when you purchase from them .
|
Re: Barebones E11
CALLING cooper!!!!
what are your thoughts a$$ load of work to make it r/c or $2000 load for a lowboy? |
Re: Barebones E11
Quote:
|
Re: Barebones E11
Quote:
|
Re: Barebones E11
Good Job Friend :-)
|
Re: Barebones E11
Any way you can take the top off, and the cab part to take a pic of inside area? And how wide is it in there? If enough room for the motors I put in the d11 that would be great, couple years so far and a lot of hard pushing they have been powerhouses!! Windshield wiper motors from robot market place, left and right. I did have to gear them down and alter output shafts but well worth it.
|
Re: Barebones E11
I have been away for a while, who makes this model?
|
Re: Barebones E11
barebones the guys that make the cat 390 excavator
|
Re: Barebones E11
Quote:
|
Re: Barebones E11
UPDATES!!!!!
|
Re: Barebones E11
Nothing yet been building a house not much time for hobbies at the moment
|
Re: Barebones E11
http://i1379.photobucket.com/albums/...pszehx6dza.jpg
http://i1379.photobucket.com/albums/...psgnero5jz.jpg http://i1379.photobucket.com/albums/...ps88qcnqk6.jpg http://i1379.photobucket.com/albums/...psykqyt5ij.jpg Small up date on the dozer made new rollers and got new chain for the tracks it should hold up better then what was supplied with the model i hope thx for lookin |
Re: Barebones E11
http://i1379.photobucket.com/albums/...psepgutrlj.jpg
Under carage almost done http://i1379.photobucket.com/albums/...psfw3brm3q.jpg Made a simple jig to hold the chain and the track pad square going to start welding going to need a spray bottle of water to keep wood cool but it should work |
Re: Barebones E11
only real problem I see so far is they didn't add a track tensioner assembly
|
Re: Barebones E11
The front idler is adjustable but it's not spring loaded
|
Re: Barebones E11
Quote:
|
All times are GMT -4. The time now is 10:16 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.