RC Truck and Construction

RC Truck and Construction (https://www.rctruckandconstruction.com/index.php)
-   Scale Buildings, Warehouses and Structures. (https://www.rctruckandconstruction.com/forumdisplay.php?f=61)
-   -   Coroplast scale buildings (https://www.rctruckandconstruction.com/showthread.php?t=11250)

Supermario 02-16-2016 05:39 PM

Coroplast scale buildings
 
As many may know I've been posting pictures of the scale buildings I've made on my construction site thread. I figured it was time to share here in this section so all could see and maybe get a few ideas and inspiration from it.
The material of choice is Coroplast which is what I like to call, plastic cardboard. Available from Home Depot in 4'X8' sheets. Light but strong, easy to cut , weather proof, cheap.
So with glue gun in hand , utility knife and some wood strips from a arts n crafts store, the building began

First building was the 2 bay garage.

http://i1275.photobucket.com/albums/...psreezmvpj.jpg

http://i1275.photobucket.com/albums/...pscpwsjf4m.jpg

http://i1275.photobucket.com/albums/...psysyinyyx.jpg

http://i1275.photobucket.com/albums/...pst9nwr7al.jpg

http://i1275.photobucket.com/albums/...ps9xqnzhws.jpg

http://i1275.photobucket.com/albums/...ps9x9807t0.jpg

http://i1275.photobucket.com/albums/...psk4xwksl8.jpg

http://i1275.photobucket.com/albums/...pskpig195u.jpg


http://i1275.photobucket.com/albums/...ps1gqwyjaq.jpg

http://i1275.photobucket.com/albums/...pscw0terv5.jpg


And a video tour..... http://youtu.be/ZyNf_ni-qqo

Supermario 02-16-2016 06:10 PM

Re: Coroplast scale buildings
 
Next up to build was a house. I want to make a few homes to create a small neighbourhood. Problem was, although I plan on leaving these buildings outdoors for the summer I still need to bring in the house for winter and all these buildings will take a lot of space:eek:. The other thing is wanting to be able to bring my buildings to our club RC shows that we travel to and once again, space is an issue.
So, thanks to this Coroplast boards I had an idea about how to make a building that could be assembled and then disassembled and stored flat.

All started like this....

http://i1275.photobucket.com/albums/...pszcpd3ohc.jpg

http://i1275.photobucket.com/albums/...psoz031vpi.jpg

http://i1275.photobucket.com/albums/...pscsa9xw8s.jpg


All one piece and became this....

http://i1275.photobucket.com/albums/...psvsac9stx.jpg

http://i1275.photobucket.com/albums/...psyajbdj3t.jpg

http://i1275.photobucket.com/albums/...psuxe0fyz0.jpg


http://i1275.photobucket.com/albums/...pstuu166fd.jpg


The corner piece I made using same material and a glue gun to secure the top corner where the panels meet.

http://i1275.photobucket.com/albums/...psj9cbnweh.jpg

http://i1275.photobucket.com/albums/...pskagwyi9f.jpg

Making the front steps....

http://i1275.photobucket.com/albums/...pslulmopek.jpg

http://i1275.photobucket.com/albums/...psdgnyfbwe.jpg

http://i1275.photobucket.com/albums/...pslilksn3k.jpg

http://i1275.photobucket.com/albums/...psci9vfdky.jpg

And a video showing ease of assembly....... http://youtu.be/XvXt94oCL5Q

Supermario 02-16-2016 06:24 PM

Re: Coroplast scale buildings
 
Latest building is a 3 storey, started as a apartment but turned into a office building. My RC trucking company needs a head office right? :lol:

Just like the house, one piece and using 1/8 wooden dowels to secure to the base. Still easy to assemble, just a little more awkward than the house but it is much larger. Still lots to do but figured I'd share where it's at right now.
I used the same type of fabric that covers the garage but I didn't want it to look the same color so I gave it a skim paint job with some of that textured brown paint in a spray can. I'm ok with the results for now..... Worst case scenario, it's only spray adhesive holding it on and can probably peel off and try something else if need be.

Anyway, here it is with all its freaking windows! :eek: no idea why I put so many:confused: I have to individually size and cut each and every window trim to fit:eek:. Oh well, labour of love anyway. :lol:

http://i1275.photobucket.com/albums/...ps2xgfqtrk.jpg

http://i1275.photobucket.com/albums/...psfwfeklfb.jpg

http://i1275.photobucket.com/albums/...ps5qbtlbce.jpg

http://i1275.photobucket.com/albums/...psxovdisfe.jpg

http://i1275.photobucket.com/albums/...pszi1jmmva.jpg

up9018 02-17-2016 08:01 AM

Re: Coroplast scale buildings
 
That is a pretty cool idea. Stuff is way lighter than plywood and would make some great buildings to move to a show.

blitzk 02-17-2016 10:24 AM

Re: Coroplast scale buildings
 
They look great Mario. You did a fantastic job!!!

Stuff 02-17-2016 11:41 AM

Re: Coroplast scale buildings
 
wow that looks super easy!

Supermario 02-18-2016 05:03 PM

Re: Coroplast scale buildings
 
Quote:

Originally Posted by up9018 (Post 139682)
That is a pretty cool idea. Stuff is way lighter than plywood and would make some great buildings to move to a show.

Yes. Light but fairly strong and no dust or special tooling to worry about. :D

Quote:

Originally Posted by blitzk (Post 139689)
They look great Mario. You did a fantastic job!!!

Thanks bud, appreciate it.:cool:

Quote:

Originally Posted by Stuff (Post 139692)
wow that looks super easy!

I'm no expert carpenter but this was super easy to work with and build. Made the house in a couple nights.
Haven't done any wind tests but confident it's snug on the dowels and handle a good breeze..... Now the open spaces of Estevan on the other hand...not sure:rolleyes::lol:. Besides, who plays in 40mph winds anyway. :lol:

Supermario 02-18-2016 05:44 PM

Re: Coroplast scale buildings
 
The only tricky part is cutting the fold points. Because of the size of building I had to use the 8' length of the sheet, same direction the ribs run to make it all one piece. Could build in sections for larger stuff but I like the solid feel of one continuous piece.
Anyway, this all means the fold cuts are across the grain of the sheet. So I mark the distance I want, then make a mark 5mm on each side of that line.carefully cut through just one layer and then trim each individual rib off. After you cut a few and have something to grab onto its easy going. Pulling up on the scrap piece as you just touch with a knife and it cuts clean off. Trick is to get as close to the outer layer so it will fold easy but not cut through the outer layer.

I didn't take the time to cut close in these pics And the fold is a little stubborn till I trimmed. Smaller buildings none of this is an issue as following the ribs makes life easy like the stairs were to make.

http://i1275.photobucket.com/albums/...pssmswmctg.jpg

http://i1275.photobucket.com/albums/...ps0ygaupmj.jpg

http://i1275.photobucket.com/albums/...psw72z04cu.jpg

Supermario 02-19-2016 10:28 PM

Re: Coroplast scale buildings
 
Office building is pretty much done except for front steps and interior lighting. Roof is on, window trim done, so I figured.....time for the first family photo! :D:lol:

http://i1275.photobucket.com/albums/...psl1hymo12.jpg

http://i1275.photobucket.com/albums/...psrdj451u2.jpg

http://i1275.photobucket.com/albums/...psaz3f1qc3.jpg

http://i1275.photobucket.com/albums/...pscq61elq7.jpg

mcl fabrication 02-19-2016 11:47 PM

Re: Coroplast scale buildings
 
Real nice work Mario. And throw a facer and soffit on the little gray house.

Bo Wallen 02-20-2016 11:56 AM

Re: Coroplast scale buildings
 
Great high-rise Mr Builder :cool: Who are you going to handcuff....:cop:

Supermario 02-21-2016 10:05 AM

Re: Coroplast scale buildings
 
Quote:

Originally Posted by mcl fabrication (Post 139856)
Real nice work Mario. And throw a facer and soffit on the little gray house.

Thank you, glad you like:) I plan on putting facer but waiting for arts n crafts store to get some more basswood in stock! It seems I've cleaned them out lately.:rolleyes::lol:

Quote:

Originally Posted by Bo Wallen (Post 139865)
Great high-rise Mr Builder :cool: Who are you going to handcuff....:cop:

Something tells me I'm going to have a hard time explaining pink plastic hand cuffs so I'll just say..... Didn't name our RC company S&M for nothing! :eek::lol::lol:

Always check pictures before posting :cop::lol:

Supermario 02-21-2016 10:13 AM

Re: Coroplast scale buildings
 
Office building gets remote controlled lights using a IR system. :)
All self contained in the roof and still maintains a flat pack storage when disassembled.

http://i1275.photobucket.com/albums/...psqssksacf.jpg

http://i1275.photobucket.com/albums/...pstsuxqt2k.jpg

http://i1275.photobucket.com/albums/...psr5nnhr2v.jpg

http://i1275.photobucket.com/albums/...psbrggz0py.jpg

http://i1275.photobucket.com/albums/...psjsmpaplm.jpg


http://i1275.photobucket.com/albums/...psyrxhw5fd.jpg

RCP57 02-21-2016 10:29 AM

Re: Coroplast scale buildings
 
You need to make some shadows of people doing "stuff" in the widows. You know, after hours paperwork...lol Bo needs entertainment when he's camping in your backyard this summer.:rolleyes:

Bo Wallen 02-21-2016 01:00 PM

Re: Coroplast scale buildings
 
Quote:

Originally Posted by RCP57 (Post 139915)
You need to make some shadows of people doing "stuff" in the widows. You know, after hours paperwork...lol Bo needs entertainment when he's camping in your backyard this summer.:rolleyes:

Yeah i sure do.......and i like red velvet curtains too..........:D

NYHowie 02-21-2016 03:04 PM

Re: Coroplast scale buildings
 
awesome builds, great idea!

bigford 02-21-2016 04:20 PM

Re: Coroplast scale buildings
 
reg you going to make the S&M party in august ??

Bo Wallen 02-21-2016 04:44 PM

Re: Coroplast scale buildings
 
I think he must do............it's going to be gnarly good :p

Supermario 02-21-2016 08:54 PM

Re: Coroplast scale buildings
 
Quote:

Originally Posted by RCP57 (Post 139915)
You need to make some shadows of people doing "stuff" in the widows. You know, after hours paperwork...lol Bo needs entertainment when he's camping in your backyard this summer.:rolleyes:

That's a great idea! Not sure if I can pull it off but definitely going to give it a try. :D

im so excited the east boys are coming, sure would be nice if some friends from the west could make it. :)

Supermario 02-21-2016 08:58 PM

Re: Coroplast scale buildings
 
Quote:

Originally Posted by NYHowie (Post 139925)
awesome builds, great idea!

Thanks NYhowie I appreciate it.:cool:


All times are GMT -4. The time now is 05:34 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.