Question
What was the tire size on the jeeps, 3/4 ton and the 2 1/2 ton trucks?
I would think the jeeps used the standard size 600 x 16. Thank you Ken |
Re: Question
6.00 X 16 - MB/GPW/GPA/M422 & WWII TRAILER
7.00 X 16 - M38/M38A1/M151/M100/M416 TRAILER Truck, 3/4 ton, 4x4, Dodge 9.00 X 16 - M37/M715/M101 SERIES TRAILER These are the newer tires http://militarytires.com/ M34 was equipped with 11.00x20 single wheel tires The tires varied little for this whole series. M35, with 9.00x20 single front and dual-mounted 9.00x20 tires in tandem M35 - Truck, Cargo, 2 1/2-ton, 6x6, with or w/o winch M35C- Truck, Cargo, 2 1/2-ton, 6x6, drop side, with or w/o winch M36- Truck, Cargo, 2 1/2-ton, 6x6, XLWB, with or w/o winch M44- Truck, Chassis, 2 1/2-ton, 6x6, with or w/o winch M45- Truck, Chassis, 2 1/2-ton, 6x6, with or w/o winch M46C- Truck, Chassis, 2 1/2-ton, 6x6, with or w/o winch M47- Truck, Dump Truck Chassis M48- Truck, Tractor M49- Truck, Tank, 2 1/2-ton, 6x6, Fuel Servicing, with or w/o winch M50- Truck, Tank, 2 1/2-ton, 6x6, Water, 1000 gal., with or w/o winch M57- Truck Chassis M59- Truck, Dump M60- Truck, Wrecker, Light M108- Truck, Crane, 2 1/2 ton, 6x6 M109- Truck, Van, 2 1/2-ton, 6x6, Shop, with or w/o winch M132- Truck, Medical Van M185- Truck, Van, 2 1/2-ton, 6x6, Shop Repair, w/o winch M275- Truck, Tractor, 2 1/2-ton, 6x6, w/low mtd 5th wheel, with or w/o winch M292- Truck, Van, 2 1/2-ton, 6x6, Expansible, w/hydraulic liftgate, w/LD 465 Engine M342- Truck, Dump, 2 1/2-ton, 6x6, with or w/o winch. Replaces M47, M59, M215 M387- Truck, Guided Missile Launcher, 2 1/2-ton, 6x6. For Lacrosse Guided Missile, based on M44 chassis. M398- Truck, Guided Missile Launcher, 2 1/2-ton, 6x6. For Lacrosse Guided Missile, based on M45 chassis. M756- Truck, Maintenance, 2 1/2-ton, 6x6, Pipeline Construction, with winch M763- Truck, Maintenance, Telephone M764- Truck, Maintenance, 2 1/2-ton, 6x6, Earth-boring Machine & Pole Setter, with winch |
Re: Question
CAR5858;
Thank you for all the info on the tires, I feel like I hit the jack pot. Ken |
Re: Question
Your welcome
Carl |
All times are GMT -4. The time now is 07:26 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.