First build, scania R620
 

So about 2 months back I got an R620 for my birthday and im getting to the stage that i'm customizing it to my liking.

so i'm planning on getting chrome tanks for either side, and scale diamond plate deck on it. I moved the battery to up in the cab out of the way.

Attachment 2358

Attachment 2359

And I'v ordered a live bottom trailer from Izzy.

Attachment 2360

Re: First build, scania R620
 

Congrats on your truck! You will not be dissapointed by Izzy's trailers!!!!! Top notch work!!

Re: First build, scania R620
 

I did more mods to my truck today, I ditched the futaba steering servo and replaced it with a traxxas mini servo so I could mount it under the cab.

Attachment 2361

Attachment 2362

I'v now got 2 tanks, a 3Racing Light Unit and a new radio system coming (I needed more channels for Izzy's trailer)

Re: First build, scania R620
 

So small update, i'm currently waiting on:

A 6 channel radio system

http://www.ebay.com.au/itm/390511348... 4.m1497.l2649

A 3Racing light unit

http://www.ebay.com.au/itm/221151498... 4.m1497.l2649

A 65T motor

http://www.ebay.com.au/itm/310550602...ht_2841wt_1163

An RC4WD R2, 2 speed transmission

http://store.rc4wd.com/R2-Black-2-Sp...ion_p_841.html

and a punisher shaft

http://store.rc4wd.com/Punisher-Shaf...ole_p_815.html

Eventually i'll get a TLT-1 for a front axle, but that will happen when I get the money, but that's why I got the transmission.

any questions, criticisms or recommendations would be nice.

Thanks Buzzy

Re: First build, scania R620
 

so it's been a while, i'v been on holidays, and when I got home there were so many pacels it was like christmas :D

so I got the new motor and transmission in, I have lights kind of, they arent working at the moment, they were before though. new drive shaft which is huge!! and I got a spektrum dx6 :D

Attachment 2475

Attachment 2476



thanks buzzy

Re: First build, scania R620
 

Thanks, will do, iv still got the tanks to put on, waiting on some tools to come.

Re: First build, scania R620
 

got the tanks on today, still need to polish them. it's really starting to come together.

Attachment 2484

Re: First build, scania R620
 

Re: First build, scania R620
 

Looking good!!

Re: First build, scania R620
 

Thanks guys, i'v got styrene coming at the moment to make a box to put behind the cab.

Re: First build, scania R620
 

so I finally got all the styrene I ordered and have been making the bod for the back of my truck to store the battery for the truck and battery and controller for Izzy's trailer that is finished and almost on it's way!! :D

so heres the box, I will paint it and make it look good soon but for now this is it.

http://i1274.photobucket.com/albums/...ps9273e81c.jpg

Re: First build, scania R620
 

lookimg good so far I like the tanks they look great on there. how does the mini servo work? is it strong enough?

Re: First build, scania R620
 

Thanks, the tanks are from Russ, I polished them up but they seem to like finger prints. Haha
And I ended up changing that setup out for the original servo, I have the steering servo and gear servo setup like they are in the knight hauler. Even that is struggling abit, I'll see how it goes once I get a trailer on it then I might buy a high torque servo.

Re: First build, scania R620
 

Yes I was thinking that but for now I cant be bothered trying to work out how to do it, so I put my traxxas slash back together ( which is where the servo was from)


heres a look at the steering and gear servo's, not the best angle but its hard to get an undercarriage shot.
http://i1274.photobucket.com/albums/...ps2bdf6db2.jpg

here my nice mess of wires...
http://i1274.photobucket.com/albums/...ps5018a2e7.jpg

ad this is what i'm putting on the deck once I get the back box all sorted out and mounted.
http://i1274.photobucket.com/albums/...ps31348bc4.jpg

Re: First build, scania R620
 

so I'v been abit busy today on the truck, I have put the first part of the deck plate on and made up a mount for the fifth wheel servo, it got the better of me so I pulled my slash apart again to use the servo. unfortunately the stock fifth wheel rod isn't long enough so I'v ordered a 300mm rod which will probably take a couple of weeks to get here.

here's the deck plate.

http://i1274.photobucket.com/albums/...ps2ac30d57.jpg

Re: First build, scania R620
 

so today I got the back plate on,

http://i1274.photobucket.com/albums/...ps923282d7.jpg

Re: First build, scania R620
 

April 3rd (So says UPS) - - so 10 days and counting..........

Re: First build, scania R620
 

Buzzy - the makers for servo bits make a charge plug holder - like these
http://www3.towerhobbies.com/cgi-bin...&I=LXH456&P=ML
I suggest something like them
and there is one for the Deans plugs too - but it is fairly new on the market ...
- i founf this on a google search
http://www.google.com/imgres?q=deans...5&tx=71&ty=102

Re: First build, scania R620
 

thanks izzy, but according to tracking it's already in Australia, so it would be sad if it took 4 days to get to Australia then another 5 to get to my place, so fingers crossed.
and thanks for the brackets.

buzzy

Re: First build, scania R620
 

so it turned up today :D !!

it was packed great and looks awesome.

I don't have any actual pictures of it uploaded yet because I have terribly slow internet at the moment.

http://i1274.photobucket.com/albums/...psc9b0956b.jpg

http://i1274.photobucket.com/albums/...ps1b8c0230.jpg

http://i1274.photobucket.com/albums/...ps14073e82.jpg