CrackerBox Test Chassis
I started this build at Indy. It's purpose is to test different RPM gear motors and motor/transmission combinations. Actually wasn't going to put a cab on it, figured it would never get out of the basement. That being said I have some styrene so I thought I'd give a Crackerbox cab a try, it's pretty straight forward with no weird curves, shouldn't be that bad to do. (Famous last words!)
http://i1116.photobucket.com/albums/...psknetjzws.jpg http://i1116.photobucket.com/albums/...psrlekymis.jpg http://i1116.photobucket.com/albums/...ps8tjxbqiu.jpg http://i1116.photobucket.com/albums/...ps8qqy2zib.jpg http://i1116.photobucket.com/albums/...psloe5ku9s.jpg Thanks for looking! Kent. :D |
Re: CrackerBox Test Chassis
That's pretty cool than you can do that flat of a drivetrain.
Is the steering tierod too short, or is it just the picture angle? |
Re: CrackerBox Test Chassis
Hi Kent would you share what motor you have in your truck ? Thanks .
|
Re: CrackerBox Test Chassis
Quote:
Quote:
https://www.servocity.com/motors-act...ry-gear-motors |
Re: CrackerBox Test Chassis
Quote:
|
Re: CrackerBox Test Chassis
Hi Kent thanks for the info will order one today
|
Re: CrackerBox Test Chassis
Quote:
Quote:
Got the radio mounted on the cab floor. Now is all I need to is build a drive shaft so I can watch it move! http://i1116.photobucket.com/albums/...psjbl0awej.jpg |
Re: CrackerBox Test Chassis
Very Nice, Always been a fan of a crackerbox.
|
Re: CrackerBox Test Chassis
Awesome little truck you know Im a fan of the cracker box. I talked with Travis and he pointed me to this same tranny for my new one. I have not got it in yet but I like how you have your very nice work.
|
Re: CrackerBox Test Chassis
Great looking build so far! That motor and tranny set up is so clean and simple, I'll never use a Tamiya 3 speed set up again! :D
Just imagine the power you could pack in that cracker box if you went with a lipo:rolleyes:;) Oh, and is the driveshaft built yet? :) |
Re: CrackerBox Test Chassis
Quote:
Quote:
As far as the Crackerbox goes I wish I would have known that. I would have stuck with my original plan and cut up a globe cab to put on and let you do the Box justice ;). This was just a kick around test chassis that originally wasn't going to see the light of day and wasn't even going to have a cab.......but I couldn't stop there.:lol::lol: Quote:
The drive shaft was started, finished and installed about 15 minutes after I posted that and I was tired and quit since I grabbed the wrong bit and over drilled the front cross by .10 mm. :mad:, for those who don't Know the shafts on these geared motors are 6mm. This is the first time I've been back in the shop. When building my shafts I use the method that Tamiya Cowboy posted, Thanks Paul! It's a sticky in the Mechanical tech section. I use Traxxas parts and brass tube due to local parts availability, but the construction methods are the same. If you have all the parts they go together quite fast. I think I have maybe 30-40 dollars total in ALL the shafts I have in 3 trucks that includes the 6x6. Thanks Mario, good hearing from you. http://www.rctruckandconstruction.co...read.php?t=708 http://i1116.photobucket.com/albums/...psv9pltplv.jpg http://i1116.photobucket.com/albums/...psu4ylvcuf.jpg Thanks guys! :D |
Re: CrackerBox Test Chassis
Driveshaft looks great and driveline angle looks perfect.
Ya, been quiet lately, life sure can change quickly. It's been weird to go from having an awsome backyard meet and one week later house is on the market and now all those things around the house that need fixing I been putting off are getting done to make it all nice for perspective buyers now. Paying for my procrastination right now.:eek::lol: so no time or desire to RC lately....:( |
Re: CrackerBox Test Chassis
A couple update photos, long way to go yet!
http://i1116.photobucket.com/albums/...pskn5jjrj8.jpg Well maybe one photo. Photobuckects being a PIA and won't load my pictures. Has anyone found a reliable photo hosting program other than PB? |
Re: CrackerBox Test Chassis
Nice start on the cab! That's looking cool.
I've been hearing good things about imgur, but haven't tried them yet. Photobucket has become really unusable |
Re: CrackerBox Test Chassis
I store all of my stuff on google drive, if you have a Gmail etc. you have it. Works great!
|
Re: CrackerBox Test Chassis
Quote:
Quote:
|
Re: CrackerBox Test Chassis
LOOK'IN GOOD Kent!! Keep us updated.
-Terry |
Re: CrackerBox Test Chassis
Great start on the cab Kent!
|
Re: CrackerBox Test Chassis
Great looking truck Kent..
|
Re: CrackerBox Test Chassis
Quote:
Quote:
Quote:
Thanks guys, not much new. Spent yesterday on the Bridgeport at work redoing a part of the frame rails on the dump trailer in the photos and driving an hour to the LHS to find some clear sheet to make Windows for the Crackerbox. Missed a delivery from the post office that had some planetary gear motors to try in this chassis and screw drive components for another dump build coming later. :D Kent |
All times are GMT -4. The time now is 07:34 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.