Hyd. Pumps
 

Looking around the net and came accrossed these pumps and was wondering if one of them would be a viable hyd. pump. They may be priced out of range. http://shopping.netsuite.com/s.nl/c.ACCT103531/sc.14/.f

Re: Hyd. Pumps
 

Ah yes, Flightworks! We've been down this road already with a few members inquiring with this company about using one of their "fuel" pumps for our model hobby... then there was talk that Flightworks was looking into designing a hyd pump for our needs & then PMD stuck their nose in there to aquire the pumps for their own product line and ---- haven't heard anything since. That's two or three yrs ago now.

Re: Hyd. Pumps
 

It appears that they built the new pump alright and has good pressure but diesel/kerosene isn't going to do our hobby a bit of good. And them being afraid to show the price is not a good sign. I was really hoping these guys were going to come through with a pump, they seemed to know what we were looking for when I spoke to them.

Re: Hyd. Pumps
 

I just requested a quote for 1 :confused: we'll see :rolleyes: I'll let you know

Re: Hyd. Pumps
 

Very interesting...... I'm sure that the design for a hyd pump wouldn't be too much differant from a gear pump that would pump diesel/kerosene, seems to me that it might be a easier build. Maybe they would respond to a sincere demand if it was brought to them. Once again, it probably would come down to how proud they are of their products. Just a thought. Fred

Ihbuilder, Which series pump did you request?

Re: Hyd. Pumps
 

I asked them about the cost for their "custom gear pumps (up to 800Ml/min and 20 bar)" and received a reply that the cost was $800-$1,200 depending on the requiremements. Perhaps it would end up being less but at that starting price I didn't inquire further.

Richard

Re: Hyd. Pumps
 

Fred here's the part # 2212-X01V-SSBYZ it's the high end series . but if it ends up being what vanisle got I'll tell them where to put it and z germans will keep getting americana business . The 1 I made is out of a cummins fuel transfer pump . the motor was shot but the vain pump was in great condition .

IHSteve

Re: Hyd. Pumps
 

has anyone ever looked at the way lube pumps from say mazak or cincinatti machines? I have a old one that I am going to cut the housing down and try it. But it is a decent pressure pump.

Re: Hyd. Pumps
 

I have thought about it , I just never got to see the size


IHSteve

Re: Hyd. Pumps
 

Hey guy's, have any of you heard of HydroLeduc, and there micro pump's and motor's?
I found this site from previous research, but haven't had dealing's with them yet.
http://www.hydroleduc.com/images/sto...lics%20net.pdf
Maybe they'll be easier to deal with than flight work's? Later, Neil#2 aka doodlebug.

Re: Hyd. Pumps
 

Can somebody tell me what psi a dump body need to operate at? Ok so the hydo-leduc pump's are too big for 1-14 scale. I'm looking at electric 12v fuel pump's to play with, 90psi is the highest rating, that I've found so far. No I don't want to cnc batch part's yet, but price's from "Europe sure add up fast! Just looking for another angle for
"cheap hydraulic's"! Later, doodlebug.

Re: Hyd. Pumps
 

The wedico pumps - not actually theirs but supplied to them by others - run at about 10Bar = 150psi. Many guys tweek theeir pumps up just a bit. So I would say not more than about 200 psi should do for all of our projects. I mmyself run the stock 150 psi without issue.

Lil-Giants - what pressure do you run?

Re: Hyd. Pumps
 

It's all in the dia of the piston.The larger the piston dia,the less pressure you need to move the load. If your only useing it for a dump,get the pump from USM tech.Just don't run it for over two minutes at a crack. I've cooked one already,& burned the crap out of my hand.:eek:
FGD

Re: Hyd. Pumps
 

Thank's guy's, still learnin' & schemin'! Hey Freddy, Do you have a link for that usm tech pump, so far googled my self and nothing yet. Thank's.
Later, doodlebug.

Re: Hyd. Pumps
 

Jungs has a pump will do 35 bars about 500 lbs for $ 222.00. Ed

Re: Hyd. Pumps
 

My current excav is set to 15bar Izzy. Dozer, track loader & adt are all left at factory setting of 10bar. I got the wheel loader 2nd hand, I think the press may have been turned up a little bit. Btw, what wedico uses in their constr models is a Leimbach hyd system.

Wedico has a bi-directional pump that works well for dump trk telescopes, though PMD is outrageous with the pricing.

The Jung pump is much too big in size & flow volume for 14th scale. That $222 is just for the pump, add another $100+ for the motor it takes to propel it and either buy or build a hyd reservior for it too.

Re: Hyd. Pumps
 

Thank's, Anybody considered a "Sticky" for hydraulic part's yet? Later, doodlebug.

Re: Hyd. Pumps
 

Forgive me but what exactly is a "Sticky"?

Re: Hyd. Pumps
 

sticky is a permenent page lol don't think i spelled that right but ya get my drift

Re: Hyd. Pumps
 

Oh I feel silly now! I totally misunderstood his comments. I know what a sticky thread is when it comes to a forum. I thought he meant some kind of equipment that could be taken apart for parts. Thanks for explaining...