D7E RC 1:7,5
3 Attachment(s)
Hello guy’s,
This is my very first tread ever started on a forum. I’ve been reading almost every RC earth moving build tread that I could find. I always loved the D7E, by design and because the technology of the machine. Two years ago I came across an old CNC mill, and started machining with it. When I managed to connect it to my computer and machine the designs without manually programming them, it started to become clear I would build a RC dozer. My background is mechanical engineering, and I was already familiar with 3D drawings. The CAM part of the building process is new for me, and I’m learning by trial and error. After designing, building and reading for more 1,5 year, I decided to start a tread about the build of my radio controlled D7E. The first few parts are machined and ready. I started with the undercarriage. The link assemblies are the first to be completed. I plan to design and build at the same time. The drawings are a little further than the parts. With this tread, I’ll show the progress as it goes. Hopefully the machine will ride next year summer. I hope you enjoy reading my posts, feel free to ask any question. Attachment 3413 Attachment 3414 Attachment 3415 Best regards, Bob. |
Re: D7E RC 1:7,5
Welcome Bob
nice job on the sprocket |
Re: D7E RC 1:7,5
Welcome aboard! I've spent time on the military version, of the D7E.
Cheer's, Neil. |
Re: D7E RC 1:7,5
Thanks for the replies.
I've machined the track links: http://i803.photobucket.com/albums/y...psef02d7c5.jpg They will be assembled to be the track at the end; http://i803.photobucket.com/albums/y...ps9aad8b2e.jpg http://i803.photobucket.com/albums/y...ps18df315b.jpg http://i803.photobucket.com/albums/y...psb64f6f28.jpg http://i803.photobucket.com/albums/y...psca00a0c4.jpg Regards, Bob |
Re: D7E RC 1:7,5
Quote:
Neil, did you work with the modern version? The electrical driven one. Regards, Bob. |
Re: D7E RC 1:7,5
****, bearings in the links, that's serious! :)
Looks like an awesome start, nice parts! |
Re: D7E RC 1:7,5
RC Dozer-you are doing some nice machine work here. Is this going to be a shelf queen are will you be using it in the dirt. I have found that these very small bearings will fail under high-loads. Keep us updated and good luck. Nice job so far!!
|
Re: D7E RC 1:7,5
Nice work, Did you weld the cleat on the pad or are they machined? I really like the rails, lots of time invested there.
|
Re: D7E RC 1:7,5
Hats off to you. Very nice start. By any chance; are those links cast?
|
Re: D7E RC 1:7,5
Quote:
I remember talking to the Cat guy at Con Expo Con Ag show, when the "new" D7E came out. The conversation was hilarious when somebody asked if it was going to start on fire once a week, like the Letourneau machine's did. My comment was, Oh you copied Terex on the blade lift cylinder. Well he did have a sense of humor. I've sat in one, no demo time at the dealer's open house yet. Look's like you have a great start! Cheer's, Neil. P.S. Have you tried Google for picture's, to help with detail's? |
Re: D7E RC 1:7,5
Great start. I'd recommend bushing instead of bearings due to the potential for dirt and grit getting into the bearings over time, bushings are much less expensive too.
I demoed a D7E about 2-3 years ago right as they came out. I thought it was a nice machine, good power, smooth operation. |
Re: D7E RC 1:7,5
Quote:
|
Re: D7E RC 1:7,5
Quote:
The pads are welded on the other side, and machined flat again before bending. |
Re: D7E RC 1:7,5
Quote:
The links started as waterjet cuts, and are machined to the current shape. It was a **** of a job, but the result is what I hoped for. |
Re: D7E RC 1:7,5
Some pretty nice detailed parts!! I'll be watching!!
|
D7E RC 1:7,5
I've been working on the drive.
The gears that I'll use are bought. At the moment I'm machining the final drive parts that hold the gears and the bearings. Hereby some scerrenprint from how it will be made. The gears http://i803.photobucket.com/albums/y...ps1393efea.jpg The design http://i803.photobucket.com/albums/y...psd125ed66.jpg http://i803.photobucket.com/albums/y...pse370daa2.jpg http://i803.photobucket.com/albums/y...ps3213b64b.jpg |
Re: D7E RC 1:7,5
Today I've been machining the gearboxes that will hold the gears.
http://i803.photobucket.com/albums/y...psfe7b2aef.jpg http://i803.photobucket.com/albums/y...ps90739966.jpg http://i803.photobucket.com/albums/y...psffe8c74d.jpg http://i803.photobucket.com/albums/y...psbd56f9aa.jpg Still needs some machining. Thanks for reading, regards Bob. |
Re: D7E RC 1:7,5
Great job on the dozer!!! Hope to see more soon.....keep up the great work!!
KP |
Re: D7E RC 1:7,5
Very nice parts. High quality build. Will be following you.
Stefan |
Re: D7E RC 1:7,5
The last few weeks, I've been machining one of the frame plates.
That was a lot of work due to all the different shapes and heights. http://i803.photobucket.com/albums/y...ps72ff5910.jpg http://i803.photobucket.com/albums/y...ps7ca09bff.jpg http://i803.photobucket.com/albums/y...ps14b6f96d.jpg The rest of the final drive parts are machined at the moment. |
All times are GMT -4. The time now is 08:18 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.