RCP57's first King...
 

.....The trouble begins... About a month ago I was approached by one of our members to possibly "return a favour" and build a dump box for them. I had been pondering the idea of building a box for my Bruder Mack conversion and this was the kick I needed to get started. I started out by making up some press plates to bend the sides and used a brake to make the other pieces. It all came together quickly and I found myself in need of a truck so that I could get a feel for what it should look like on a King. I had been looking locally with no luck and was going to borrow a truck from Chaseracer(Jason) to get things started. I knew that a good friend of Jason's had a truck that was partially assembled but hadn't been touched in a long time so I asked(maybe begged) him to call and ask if it was for sale. Anyway to keep a long story from getting longer I was able to work out a deal and get myself a KH!

The truck has a 85 turn motor, high torque servos and aftermarket tires but that's about it. I still need a few things to get it up and running but all in good time.

Once I had the truck I figured I should build myself a dump box as well...Then I thought why not make three, or four or...

After all that BS here is my basically stock, non running KH and some dumps...

http://i1293.photobucket.com/albums/...ps0f5ee639.jpg
Not much size difference hey?:D
http://i1293.photobucket.com/albums/...psd5ba9cc1.jpg
http://i1293.photobucket.com/albums/...ps869daa4e.jpg
http://i1293.photobucket.com/albums/...ps1d1956b0.jpg
http://i1293.photobucket.com/albums/...ps1a50105e.jpg
http://i1293.photobucket.com/albums/...psec0ffce0.jpg
http://i1293.photobucket.com/albums/...psebcb6e14.jpg
http://i1293.photobucket.com/albums/...psc90795f2.jpg
http://i1293.photobucket.com/albums/...psb2a590cd.jpg
http://i1293.photobucket.com/albums/...ps2675fd96.jpg
http://i1293.photobucket.com/albums/...ps05fbcba9.jpg
http://i1293.photobucket.com/albums/...ps6611acb4.jpg
http://i1293.photobucket.com/albums/...ps64a949c2.jpg

Thanks for looking!

Re: RCP57's first King...
 

Looks good you did a fantastic job. I like your screwdrive set up, the cylinder looks nice. Can you get us a video of the dump lifting a load.

Travis

Re: RCP57's first King...
 

Thanks a lot Travis! I tried to do things a little differently and yet keep it a simple bolt on.
Here's a couple test vids-
http://www.youtube.com/watch?v=SzEa4...tJ-DusnO8Onw7A
http://www.youtube.com/watch?v=Op4bp...tJ-DusnO8Onw7A


Reg

Re: RCP57's first King...
 

Great work Reg! :cool:

What was your time line to build each box?

It'd be good to see a vid of screw drive working. ;)

Re: RCP57's first King...
 

Check out the post above Joe. I haven't filmed much of them in action yet but in the first video it lifts 17-18lbs. I don't know how long it would last lifting that much weight though. I have one box that is homeless at the moment...

Re: RCP57's first King...
 

Looks good, works good, and it is nice and simple. Job well done. Hec I build screwdrive dump trucks and I would still buy one of these I like it. I give it 2 thumbs up.:cool:

Travis

Re: RCP57's first King...
 

I always knew the 850 was bigger but :jaw: now I see !:eek::)


Always glad to be referred to as a kick instead of a pain ;):p
Amazing, fast work once again Reg!:cool:

Mario

Re: RCP57's first King...
 

Re: RCP57's first King...
 

You make some bad *** dump boxes. Any thoughts of doing these for selling purposes? And what is the chances of you attempting a dump trailer?

Re: RCP57's first King...
 

A big thanks to everyone! I was a little worried if other people would like the way I built them. I guess this all answers my question.:bounce:

Yes I would like to build some more and sell them but this is probably not the section to discuss that in.

Thanks again for all the kind words...and you're a great kicker Mario!

Re: RCP57's first King...
 

Here's a couple pictures of the Mack box. It is shorter, wider and taller than the KH version.

http://i1293.photobucket.com/albums/...ps2679af42.jpg
http://i1293.photobucket.com/albums/...pscf427a8d.jpg
http://i1293.photobucket.com/albums/...psf2ac1155.jpg
http://i1293.photobucket.com/albums/...ps52992dc0.jpg

Reg

Re: RCP57's first King...
 

Yeah, I was reading & typing before you posted... then a visitor at my door... now I'm back again. I'll take it, the last one you have & see if I can break it. :D PM the details. ;)

Re: RCP57's first King...
 

Those boxes are gorgeous!

Re: RCP57's first King...
 

Great job Reg! glad to see you pulled the screw drive off, without having to put a subframe on top of the kinghauler frame.
Cheer's, Neil.

Re: RCP57's first King...
 

Great job Reg :cool: I've seen them on YT just didn't get too comment .

Re: RCP57's first King...
 

Beautiful,what kind of motor/gearbox are you using to lift the box?
Thanks
Jack

Re: RCP57's first King...
 

I would be interested in one also...great job

Re: RCP57's first King...
 

very cool truck!


i have the rc4wd 85t motor. not impressed for power like the old novak fifty five i used to have..

Re: RCP57's first King...
 

Looks nice

Re: RCP57's first King...
 

Nice work, I too like the cylinder, adds a touch of scale.
Must be great having a tig and knowing how to use it!

Stu