Custom Bruder Dumper Build
4 Attachment(s)
I started this rig a while back now, and have been tinkering on it as time allows. Hopefully I will have the rig run able before the year is out this year. Even if it still isn't finished.
Apparently, I need to upload the pics differently, and link them to here. (Pictures to come soon) |
Re: Custom Bruder Dumper Build
http://i1308.photobucket.com/albums/...psdje37nhg.jpg
Dump Bed Mounted Box Tipped Up. Cab Sittign in Place on Main Frame |
Re: Custom Bruder Dumper Build
[IMG]http://i1308.photobucket.com/albums/...psgv3k9ycv.jpg[/IMG]
Dump Bed Mounted Box Down, with Cab Sitting in Place |
Re: Custom Bruder Dumper Build
|
Re: Custom Bruder Dumper Build
[IMG]http://i1308.photobucket.com/albums/...ps5hskkyps.jpg[/IMG]
Axles Sitting In Approximate Place Under Main Frame 1 http://i1308.photobucket.com/albums/...psqvykv8zp.jpg Axles Sitting In Approximate Place Under Main Frame 2 |
Re: Custom Bruder Dumper Build
http://i1308.photobucket.com/albums/...psuuqh3yee.jpg
Rear Axle Assembly With Suspension (Top Side View) http://i1308.photobucket.com/albums/...psukbutu99.jpg Rear Axle Assembly With Suspension (Rear View) |
Re: Custom Bruder Dumper Build
[IMG]http://i1308.photobucket.com/albums/...ps27ajvaew.jpg[/IMG]
Box and Cylinder Mounted. Tranny in Place. No Cab. http://i1308.photobucket.com/albums/...pszyh1www5.jpg Box Frame and Cylinder Mounted. Tranny In PLace. Front Inside View. |
Re: Custom Bruder Dumper Build
[IMG]http://i1308.photobucket.com/albums/...pslunmtgnr.jpg[/IMG]
Box Dump Frame Removed. Axles Mounted with Drive shafts. Upper Left View. http://i1308.photobucket.com/albums/...psgsqyfugs.jpg Box Dump Frame Removed. Axles Mounted with Drive Shafts. Front Left View. http://i1308.photobucket.com/albums/...psjvpmbxe0.jpg Box Dump Frame Removed. Axles Mounted with Drive Shafts. Front View. |
Re: Custom Bruder Dumper Build
Looking good! What axles are you using? Can the diffs be locked out? Is that what the larger socket head screw on the upper left rear of the diff housing is for?
-Terry |
Re: Custom Bruder Dumper Build
Quote:
|
Re: Custom Bruder Dumper Build
THANKS for the info! Yea, after I ask what the screw on the pumpkin was, I remembered that it is for adding the oil.
Nice set-up!! -Terry |
Re: Custom Bruder Dumper Build
Well, I have had the steering completed and threw a motor on it to be able to run it around. The motor I threw on it will not be the one that I run on it, but I just needed to get a good starting point for starting input RPM for the setup. I have been working on the dump mechanism recently and will post up some pictures and maybe the test speed videos I shot soon.
|
Re: Custom Bruder Dumper Build
i got the same truck . looking to start in the late spring .. what trans is that , looks like it fits well . great start . cant wait to see more progress
|
Re: Custom Bruder Dumper Build
I Am also going To Modify a Bruder. they are really a good and cheap option. This dump truck looks awesome! Just a question, are you using hydraulics to lift the bed?
|
Re: Custom Bruder Dumper Build
Quote:
|
Re: Custom Bruder Dumper Build
Quote:
|
Re: Custom Bruder Dumper Build
i found a 3-d print of a drive train for this truck . it should be printed in a week or two . it uses the stock plastic frame and has 4 motors for the rear drive .
|
Re: Custom Bruder Dumper Build
[IMG]http://i1308.photobucket.com/albums/...psuxzozsia.jpg[/IMG]
Dump Frame Removed http://i1308.photobucket.com/albums/...ps7tzv1h5i.jpg Dump Frame With Added Servo Mount Area http://i1308.photobucket.com/albums/...ps9psdtfsb.jpg Dump Frame With Dump Drive Sitting In http://i1308.photobucket.com/albums/...pslmi3pdxj.jpg Dump Frame With Non Driven End Support Built. |
Re: Custom Bruder Dumper Build
So, the Servo will drive the ACME threaded rod, and in turn the nut will move along the shaft. The nut will be tied to the lower mount (1/4" aluminum bar you see opposite where the cylinder mounts) and as the nut moves along so will the bed Dump or lower. I know the speed with the current servo I have in it will be very slow, but if needed I can change out the servo easily in the future. I also am going to be using a Brass round Nut on the ACME rod instead of the standard ACME nut, as that will allow me the wear point instead of the shaft.
|
Re: Custom Bruder Dumper Build
Here are the Pictures I took today with the dump drive assembly finished and operating.
http://i1308.photobucket.com/albums/...psyafenbpw.jpg http://i1308.photobucket.com/albums/...ps3ojqz0pf.jpg |
All times are GMT -4. The time now is 08:28 AM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.