RC Truck and Construction

RC Truck and Construction (https://www.rctruckandconstruction.com/index.php)
-   Electronics tech (https://www.rctruckandconstruction.com/forumdisplay.php?f=102)
-   -   Where can I get a faulhaber 3557k012cr motor? (https://www.rctruckandconstruction.com/showthread.php?t=13261)

liftmys10 06-12-2018 11:45 PM

Where can I get a faulhaber 3557k012cr motor?
 
Anyone know where in US i can get a faulhaber 3557k012cr motor? I checked on ebay and I haven't found one with a CR suffix series and 12 volt. And plus everything on ebay comes with a gearhead attached to the motor.
This will go on a wedico Cat740 unless someone recommends a different motor to replace the stock Buhler motor? Looking for a little more power out of it. Thanks

Bo Wallen 06-12-2018 11:54 PM

Re: Where can I get a faulhaber 3557k012cr motor?
 
This one ? https://www.ebay.com/itm/Faulhaber-3...4383.l4275.c10

Bo Wallen 06-12-2018 11:56 PM

Re: Where can I get a faulhaber 3557k012cr motor?
 
Other motors....https://www.ebay.com/sch/i.html?_nkw...&ul_noapp=true

Bo Wallen 06-12-2018 11:59 PM

Re: Where can I get a faulhaber 3557k012cr motor?
 
Or ? https://www.ebay.com/itm/Faulhaber-D...5.c10#viTabs_0

liftmys10 06-13-2018 01:52 AM

Re: Where can I get a faulhaber 3557k012cr motor?
 
It needs to end with 12CR.
There are 3 variations.
C = weaker than original buhler motor
CS = slightly stronger than buhler
CR = much stronger than buhler.

Also 12 for 12 volts. Alot of them on ebay are 24cr for 24 volts.

Thanks though for the search.

Rimrock 06-16-2018 08:09 AM

Re: Where can I get a faulhaber 3557k012cr motor?
 
the Faulhabers are great motors, especially where on need much power in a compact unit. The 3557 is a pretty pricey engine, and possible quite overkill when it comes to power on a 740) Can recommend to test the Servonaut TM120 motor, strong and a good price. (The one with a gearbox is called GM32U450) Use them with Tamiya trucks with semi tippers, twice the weigth of a 740 I would suppose, gets the job done. I'm not familiar with what motors are in the 740 originally, but have heard several complained about the power. Some even throw out the 3 speed, and put a 1 step planetary gearmotor.
https://servonaut.de/shop/de/product...595_tm120.html
http://rctruckandconstruction.com/showthread.php?t=7666

Here is a hobby dealer in Germany that have the Faulhabers, possible a bit better price than the industrial dealers, that likely also are in the US
https://lemo-solar.de/shop/glockenankermotoren.php

(the Faulhaber motors does not have the same 'engine brake' power as standard DC motors, more feels like turning a brushless motor, even they are not brushless)

liftmys10 06-19-2018 09:53 PM

Re: Where can I get a faulhaber 3557k012cr motor?
 
Quote:

Originally Posted by Rimrock (Post 164188)
(the Faulhaber motors does not have the same 'engine brake' power as standard DC motors, more feels like turning a brushless motor, even they are not brushless)

Will the servonaut s20 speed control be able to apply brakes? Or will the truck roll on it's own if it's on a hill?

Rimrock 06-20-2018 05:11 PM

Re: Where can I get a faulhaber 3557k012cr motor?
 
Quote:

Originally Posted by liftmys10 (Post 164204)
Will the servonaut s20 speed control be able to apply brakes? Or will the truck roll on it's own if it's on a hill?

The S20 is suitable also with braking Faulhaber motors/ 'coreless motors'

liftmys10 08-14-2018 08:46 PM

Re: Where can I get a faulhaber 3557k012cr motor?
 
So I just bought a faulhaber 3557k006c (6 volt) version and I confirmed with faulhaber that I can run it on 12v but I would need to lower the speed since it will be running twice the speed with 12v. So I'm thinking if I limit my esc thru my radio and somewhat match the drive speed with the original buhler motor, do you guys think it will work out? I mean the motor I bought was $15 shipped so if it fries, I'm not too worried. Any thoughts?

Rimrock 08-15-2018 11:31 AM

Re: Where can I get a faulhaber 3557k012cr motor?
 
Quote:

Originally Posted by liftmys10 (Post 164568)
So I just bought a faulhaber 3557k006c (6 volt) version and I confirmed with faulhaber that I can run it on 12v but I would need to lower the speed since it will be running twice the speed with 12v. So I'm thinking if I limit my esc thru my radio and somewhat match the drive speed with the original buhler motor, do you guys think it will work out? I mean the motor I bought was $15 shipped so if it fries, I'm not too worried. Any thoughts?

Yeah, limit the ESC top speed through the radio. Congrats, quite an investment I can guess, an top of the line engine) Buy the way, the question needs to come, was the 12v version not avaiable?

liftmys10 08-15-2018 05:37 PM

Re: Where can I get a faulhaber 3557k012cr motor?
 
Quote:

Originally Posted by Rimrock (Post 164571)
Yeah, limit the ESC top speed through the radio. Congrats, quite an investment I can guess, an top of the line engine) Buy the way, the question needs to come, was the 12v version not avaiable?

Thanks for the tip!!
I was not able to find any 12v version without a gearbox attached on ebay. I did not want to spend $400 for a new 12v CR version which is the one that I really need. I found the 6v C version for $15 shipped so I thought to myself as long as it does not harm the speed control, I'm ok if the motor burns out at $15.

liftmys10 08-19-2018 02:55 PM

Re: Where can I get a faulhaber 3557k012cr motor?
 
Small update. I ended up getting a 6volt version for the faulhaber 3557k006c.
I'm going to limit the speed thru my radio so I wont over spin the motor since I'm using a 3s lipo. I sorta explain in the video. I'll have to test with actual load to see if it's any better from the original motor.
https://youtu.be/nEnqP5FD0Y0
https://farm2.staticflickr.com/1818/...cff0555b_c.jpg
https://farm2.staticflickr.com/1839/...4050a3e8_c.jpg
https://farm2.staticflickr.com/1820/...e9b5de4b_c.jpg


All times are GMT -4. The time now is 12:28 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.