|
Trail King Drop Deck Trailer
Here is the build of my Trail King drop deck. I started with a set of Alum rails a buddy had cut out for me on the water jet and I added 1/2 alum angle to them with 5/16 stainless screws.
http://i58.photobucket.com/albums/g2...y/IMG_0991.jpg Next I used 1/4 alum plate for the floor and bolted the rails to them. http://i58.photobucket.com/albums/g2...y/IMG_0996.jpg http://i58.photobucket.com/albums/g2...y/IMG_0995.jpg Then I used the stock plastic parts from a tamiya trailer and made my own alum plate to mount the king pin in. http://i58.photobucket.com/albums/g2...y/IMG_0997.jpg http://i58.photobucket.com/albums/g2...y/IMG_0997.jpg |
Next I did the deck out of 1/16 thick oak plywood and used brass C channel over the wood and the alum plate to finish the edges.
http://i58.photobucket.com/albums/g2...y/IMG_1003.jpg http://i58.photobucket.com/albums/g2...y/IMG_1007.jpg I also soldered the joint were the C channel met in the edges and corners. http://i58.photobucket.com/albums/g2...y/IMG_1005.jpg |
Here is the new milled ICC bumper for the trailer.
http://i58.photobucket.com/albums/g2...IMG_1011-1.jpg |
Such a sweet trailer....just awesome
|
I used the leaf springs off a Tri axle tamiya refer to mount my axles on the trailer and I also added a lower brass angle rail to the C Channel.
http://i58.photobucket.com/albums/g2...IMG_1010-1.jpg http://i58.photobucket.com/albums/g2...IMG_1009-1.jpg http://i58.photobucket.com/albums/g2...IMG_1008-1.jpg Here are some outside picks witch you can see the brass work better in. http://i58.photobucket.com/albums/g2...y/IMG_1029.jpg http://i58.photobucket.com/albums/g2...y/IMG_1030.jpg http://i58.photobucket.com/albums/g2...y/IMG_1028.jpg http://i58.photobucket.com/albums/g2...y/IMG_1031.jpg http://i58.photobucket.com/albums/g2...y/IMG_1032.jpg |
Ok here are the finished picks I got it shot with a gloss black and added the DOT tape to the sides all I have to do is do the LEDs the winter.
http://i58.photobucket.com/albums/g2...y/IMG_1035.jpg http://i58.photobucket.com/albums/g2...y/IMG_1039.jpg http://i58.photobucket.com/albums/g2...y/IMG_1034.jpg Stained the deck a Med Oak stain. http://i58.photobucket.com/albums/g2...y/IMG_1038.jpg Mud Flaps a Dragen :D http://i58.photobucket.com/albums/g2...y/IMG_1042.jpg |
Nice job Paul.:cool:
|
great paul! did your friend save the design?
|
Looks better in person that is for sure :cool:
Merritt |
Those Michelin's are sweet. I can't wait till November.
|
Paul your drop deck looks real good. Ed
|
NICE TRAILER!!!
|
Hey thanks for all the great comments guys on the trailer. I have some detail work to do you will see more of them I have 3 more to build.
|
wow Paul , I really like the way this looks :D
IHB |
2 questions Paul
1: how'd you solder the brass without burning the wood 2: is there any chance of a guy gettn a set of rails? |
Re: Trail King Drop Deck Trailer
Quote:
Thanks Much Steve Quote:
And I get a little burnage on the wood but not much it is all in how you control your heat if I can i use my big iron instead of a torch. |
Re: Trail King Drop Deck Trailer
Nice looking trailer!!
|
Re: Trail King Drop Deck Trailer
Quote:
|
Re: Trail King Drop Deck Trailer
Another great looking build Paul. Great work.
But you guys need to start building some lowboys for all this equipment that is going to be at these meets. lol |
Re: Trail King Drop Deck Trailer
Quote:
|
| All times are GMT -4. The time now is 03:52 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.