RC Truck and Construction

RC Truck and Construction (https://www.rctruckandconstruction.com/index.php)
-   Electronics tech (https://www.rctruckandconstruction.com/forumdisplay.php?f=102)
-   -   On-board charging ? (https://www.rctruckandconstruction.com/showthread.php?t=11956)

Just_Build_It 09-28-2016 09:03 PM

On-board charging ?
 
I'm considering using an on-board charging method while still connected to the ESC. I did some reading about the topic and I'm curious if anyone here charges their battery via extra plug to the battery so there is no need to remove the battery or body and deal with all that mess. I'm going to use a Y splitter so I can just pull out the extra female for charging that will be tucked away.

Does anyone have any experience with this setup and if so, where is your charging port?

gismow 09-29-2016 02:50 AM

Re: On-board charging ?
 
Hi,

yes, I do. On plus side it's a y-cable that connects the ESC and the charging port with the battery.

On minus side I do have a 3 position switch.
Center: no minus connected
Left: minus of battery connected to ESC
Right: minus of battery connected to the charging port

I'm charging my NiMH packs with 0.5A. LiPo should never be charged on-board.

Jack3M 09-29-2016 08:46 AM

Re: On-board charging ?
 
Just so long as not Lipo batteries. The fire risk is too great and could cause total loss of your machine.

Just_Build_It 09-29-2016 08:46 AM

Re: On-board charging ?
 
That's a great idea, I haven't really thought about using a 3 position switch. Thanks for the tip! I would never charge a lipo while still in any of my vehicles. I do plan on using nimh to stay on the safe side.

gmailol 10-11-2016 04:49 PM

Re: On-board charging ?
 
I also believe it's a great idea!


All times are GMT -4. The time now is 08:29 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.