RC Truck and Construction - 360L Slew Motor Slop

RC Truck and Construction (https://www.rctruckandconstruction.com/index.php)

- Construction Equipment (https://www.rctruckandconstruction.com/forumdisplay.php?f=6)

- - 360L Slew Motor Slop (https://www.rctruckandconstruction.com/showthread.php?t=13755)

360L Slew Motor Slop

Hi All,
Does anybody know of an upgrade to the 360L excavator slew motor?. Mine has a lot of slop when stationary. just adding a few upgrades like metal hydraulic lines and now would be a good time to also change out the slew motor if there was a good upgrade?

Re: 360L Slew Motor Slop

Quote:

Originally Posted by Tkelleher (Post 169642)

I don't know anything about this particular excavator, but is the slop from a gear train? If so, it might be possible to switch to a timing belt and cogged pulleys, this will remove gear mesh slop. At greater complexity and cost, they do make anti backlash gears

Re: 360L Slew Motor Slop

A fellow PNWSTE club member says the slop is in the shaft that the slew ring attaches to. He claims he took a latex shop glove, & put it between the gear & the shaft. When I saw his excavator last gathering we had, there was a lot less slop in the motions. hopefully this helps!