RC Truck and Construction - Wildland Brush Fire Truck..

RC Truck and Construction (https://www.rctruckandconstruction.com/index.php)

- Fire and Rescue and Emergency Vehicles (https://www.rctruckandconstruction.com/forumdisplay.php?f=30)

- - Wildland Brush Fire Truck.. (https://www.rctruckandconstruction.com/showthread.php?t=3184)

Wildland Brush Fire Truck..

Well I have been a closet builder again I have 5 trucks going but since on a few of them I am making little progress I have not posted on them yet. This one I have had going for about 2 months and finally have some true direction from the client on what they want..

So this client sells a lot of big trucks but they also move a lot of Brush Fire rigs do to are area of the US and the amount of fires we have in the upper plain states. They use the GMC Topkick for the larger version and the F550's and down for the smaller ones so on this model the 4 door GMC Top Kick was the choice. Now these sort of have a Army/Fire truck look to them they sit high and have a more aggressive off road tire on them and carries about 500 gals of water and have winch on the front and a water cannon on the front and 2 hose reels off the rear with some under bed boxes built in in front of the rears is how they want it to look so enuff BS here is what I have so far..

Started with the Proline E-Revo GMC body and cut the bed off of it and a 20 1/2 inch frame and F350 leafs and a TLT front and semi rear with a F350 tranny and slapped a floor pan on it.

http://i58.photobucket.com/albums/g2...boy/009-34.jpg

Next Front wheel wells to match to the body.
http://i58.photobucket.com/albums/g2...boy/010-30.jpg
Body On.
http://i58.photobucket.com/albums/g2...boy/011-26.jpg
Then a back panel to close in the cab.
http://i58.photobucket.com/albums/g2...boy/013-17.jpg
And then sides to tie in the wheel wells and the back panel.
http://i58.photobucket.com/albums/g2...boy/014-17.jpg
http://i58.photobucket.com/albums/g2...boy/015-17.jpg

Then started on the bed.. 3/16 plastic for the bed floor. And 1/4 for the cab protector rack.
http://i58.photobucket.com/albums/g2...boy/017-13.jpg

Then a tank made out of 4 inch PVC sitting on 1/4x1/2 alum angle all bolted to the frame.
http://i58.photobucket.com/albums/g2...boy/018-11.jpg
http://i58.photobucket.com/albums/g2...boy/019-11.jpg

And that is were I am at now I am starting on the under bed boxes and the angle under the bed tail and there will be lots of little detail to do and running boards winch and bumper and water cannon so lots to do..
:D

Re: Wildland Brush Fire Truck..

Thats looking cool paul.......I bet thats a challenge using that body!

Re: Wildland Brush Fire Truck..

Quote:

Originally Posted by sneaky-pete (Post 40258)

Thats looking cool Paul.......I bet that's a challenge using that body!

Thanks Much Troy it is not to bad but the pain in the arse part is it is see threw and it is hard to get a good look I want to paint it and I might tomorrow but I am trying to hold off a bit..

Re: Wildland Brush Fire Truck..

Wow this is gonna be great, I love the tough looks of the topkick.

Re: Wildland Brush Fire Truck..

Cool project Paul! Unique build.

Re: Wildland Brush Fire Truck..

Cool build Paul. Where do you find a body like that?

Brian

Re: Wildland Brush Fire Truck..

Quote:

Originally Posted by Snowman (Post 40299)

Wow this is gonna be great, I love the tough looks of the topkick.

Thanks Much Snowman I like them too they are sort of a forgotten truck I think out there..

Quote:

Originally Posted by SmallHaul (Post 40303)

Cool project Paul! Unique build.

Thanks Much Scott.. It is nice to do something different than the large car thing every now and again..

Quote:

Originally Posted by Brian in PA (Post 40304)

Cool build Paul. Where do you find a body like that?

Brian

Thanks Brian.. the body is a E-Revo body made by Proline they are great body's with great decals and masking kits..

Re: Wildland Brush Fire Truck..

Excellent start:D And this going to be a beast that it should be:eek::D;):)
Can't wait for more pic's:p:cool:

Big John

Re: Wildland Brush Fire Truck..

looking great as always, can't wait to see it finished

Re: Wildland Brush Fire Truck..

Quote:

Originally Posted by glorydays24 (Post 40369)

Excellent start:D And this going to be a beast that it should be:eek::D;):)
Can't wait for more pic's:p:cool:

Big John

Quote:

Originally Posted by chaseracer (Post 40382)

looking great as always, can't wait to see it finished

Thanks Much Guys! ;)

I did not get alot done to day but I was having a hard time seeing the over all look with a see threw body so with the little time I had I jumped in and painted the cab..

After paint and decals.
http://i58.photobucket.com/albums/g2...boy/003-55.jpg

And now staring the detail painting. I will also be doing the mirrors on the cab to but have to make them..
http://i58.photobucket.com/albums/g2...boy/002-52.jpg
http://i58.photobucket.com/albums/g2...boy/001-47.jpg

I think I am going to tint the windows a little and stick seats and a dash in it and make a cover for the motor..

Re: Wildland Brush Fire Truck..

Looking good, have you found a suitable water pump yet? I will check my parts bin I had a nice little one I was saving for my pumper but decided not to do flowing water, too much electronics and $$ to risk getting anything wet. I also have a 5 1/2" light bar sitting here from a customer that never paid, if it fits I give good deal for you. Does the water tank get enclosed inside the rear body or will it be exposed?

Re: Wildland Brush Fire Truck..

The tank in on the flat bed on the rear of the truck.. Dave shoot me a PM on the pump and the light bar..

Re: Wildland Brush Fire Truck..

Quote:

Originally Posted by Dreamweaver (Post 40412)

Lookin cool Paul..

Thanks Much Mike..

Re: Wildland Brush Fire Truck..

Hi!

very nice truck. Is it 1/10 scale?

Cheers

Pip

Re: Wildland Brush Fire Truck..

It is more like 12th or just a hair smaller but the tires scale out at 14th and the body is 14th in width?? figure that one out??

But today I did find the Robbie water pump they make and they are cheap and run 6 to 12 in volts so I can run the hole truck on 11.1 Lipo and it will be perfect..

Re: Wildland Brush Fire Truck..

Wow Man,Now this is kool!Can't wait to see this baby done.
How's that cab to work with?
FGD

Re: Wildland Brush Fire Truck..

Sweet Paul!!!! I was looking for a cab like that.. Thanks for the info

Re: Wildland Brush Fire Truck..

Thanks freddy and spud. The cab is easy to work with easy to paint you just have more detail painting to do to get the scale look right.

Re: Wildland Brush Fire Truck..

**** paul that is sick just seen it now! At least you went with a duramax!!!!! I ALSO THINK TINTED WINDOWS AND A DASH IS A GREAT IDEA AND JUST GOOD DETAIL TO THE REALISM!