A little help please
 

I was just wondering what i could do with my stock lights to make them more secure . the fog lights were not working then i jiggled them and they work a blinker does same thing still sound just no light ontill i jiggle it :confused: thanx cory

Re: A little help please
 

I use Permatex black silicone I get from the automotive store to hold my lights in place and secure the wires to the body and frame.

Re: A little help please
 

cracked wire? i used hot glue on my front and rear bumper

Re: A little help please
 

thanx guys. im gonna try the hot glue first just cause i have one, but im a rookie with it. then if that fails check out that silicone

Re: A little help please
 

Hot glue is easy just remember to hold the light in place and blow the hot glue a little to cool it off or the light will move on you a bit.

Re: A little help please
 

I agree with dabears, sounds like a broken wire or broken solder right at the lights that are acting up? The fog lights stay in place well with the metal backing plate and yes I use the good old glue gun, all my trailer marker lights are plus the wires a couple inches from the light.

Re: A little help please
 

welp after digging into it deeper even hot glue wouldnt work on my turn signal unless i pushed real hard. so since i dont have 3 hands(glue gun, push,hold wire)i cut wire skinned back rubber boot and resold the wires back on to pig tails for a forsure fix but pain in ***. the glue forsure helped on all other lights just this one was gone couldnt save her. because of this i now know how to solder (rookie pace) and hot glue gun a must in this hobby! thanx fellas

Re: A little help please
 

Glad it helped you with the other lights at least!