wedico customer service
 

how is wedico customer service i need to buy a trailer
side panel to fix the length of trailer to fit a tamiya flatbed
http://i136.photobucket.com/albums/q...0/100_0950.jpg

Re: wedico customer service
 

Have you tried calling PMD, Ric can get any Wedico part.
http://www.gardentrucking.com/

Re: wedico customer service
 

i felt kinda bad about asking rick, seeing how i bought it
off a forum member:p

Re: wedico customer service
 

Next question, does Wedico make a panel to fit a Tamiya trailer?

Re: wedico customer service
 

I think the bed sides you have are as long as they get. The dump bed that i have only has 8 panels to it. Don't fell bad about buying it from someone else he will be more than happy to help you out. You can ask him about parts to make the wedico box wider to fit the tamiya truck better.

Re: wedico customer service
 

Im going to weild the new section
to front then
widen the floor to 7 inches Biggest problem is the mix of metals alu/ stainless

Re: wedico customer service
 

I don't see why u have this problem. A wedico dump box is aluminum cast parts and stamped aluminum sheet with some stainless screws to hold it together.

Re: wedico customer service
 

are you sure? the outer panel looks to be stainless
and the inner panel aluminum

Re: wedico customer service
 

Any update on how your "scaling up"project is going? thanks

Re: wedico customer service
 

Fordie,

Looks like you could just buy a single side-panel, and bend it to 'wrap around' the front, or if you want more length, chop the single in half, and mate it to your existing sides.

Its what I'd do to 'extend' Tamiya's box semi-trailer from its 'too-short' size to regulation. And the Fruehauf's do have seams, so it doesn't have to be perfect either.

WhiteWolf
- too chicken to think of going with hydraulics!

Re: wedico customer service
 

I used the tamiya flatbed trailer and the same wedico dump box as you. The space in the front of the dump box is where the battery box is for the screw drive.