Need help with an 8x8 :D
 

Hello everyone, I'm Alex and this is my first thread on this forum.
Im new to rc trucking, but not scale builds as I have build the tamiya cc01 unimog which the thoroughly enjoyed (If only it where 1/14-1/16 :D)

So I thought id do a rc truck build next. I was thinking alog the lines of an 8x8 tipper. I know that the merc arctros is coming to the uk soon and i think i would like to use that as my platform, to create something along the lines of this:

http://zizengineering.com/imgs/a/b/u...2010_1_lgw.jpg

I found this web site that sells dump bins, however i think the mechanism is a bit too expensive for me.

I need your knowledge to help me create my dream rc truck.
- How do I turn the arctos into an 8x8 - adding 2 steer wheels at the front?
- Where do I get a relatively in expensive dump bin and mech. (Do I need to make the mech myself, using a fergil actuator or a screw drive) ?
- What parts do I need?

Thank you very much for you time.

- Alex

Re: Need help with an 8x8 :D
 

Alex - as for the dump - I suggest styrene - it's easy to work with and plenty strong. as for the mechanism - firgelli are easy and contained but a little bulky - a DIY screw drive can be achallenge if your new at it - but it affords you more flexability. AS for steering - look into the TLT front axel - it's economical - but a little wide,space out your rears to match? There are other options for front drives as well - I here that Integy just un-leashed some new axels. There are other twin steer trucks hidden in the forums - go look for them - I bet you will find some other ideas - even on trucks that are not as close to what your building as you think.

Izzy

Re: Need help with an 8x8 :D
 

Thanks for your advice, I'll start looking into the axles and find other people on the forum.
How do you think I would go about extending the frame?

Thanks

Alex

Re: Need help with an 8x8 :D
 

80 views and 1 reply surely more people know about this?

Re: Need help with an 8x8 :D
 

I agree with izzy with the styrene. As for the frame you could buy new rails from Ric thru the Gardentrucking website. They have steering blocks you can use to link 2 steering axles together. Just have to use some ingenuity. In the forum search if you type in 8x8 it'll show you ones that others have done and posted here.

Re: Need help with an 8x8 :D
 

Thanks Dabears I sent Ric a Email, Im waiting for a reply.
As for the dump bin, do you think it would be something a beginner like me could make.
Im finding it hard to find a thread for dump bins.

Re: Need help with an 8x8 :D
 

Take a look at russisloud all wheel drive project for ideas ,
And please try the search function. Sorry cant figure out how to do links
On my phone.
Cheer's, Neil.

Re: Need help with an 8x8 :D
 

The RC Tech Section is full of ideas of how to do various things.

Here's one thread for plastic dump bodies.
http://www.rctruckandconstruction.co...ead.php?t=5674

Re: Need help with an 8x8 :D
 

I just found this: http://www.rigidrc.com/shop/axle-hou...-14-truck.html
It looks great! exactly what I'm looking for.
Can anyone tell me what else i would need to complete the transmission?