Tamiya leds in PMD double squares, How!?
 

Just wondering how you guys managed to fit the leds from the mfu kit into the PMD peterbilt double square headlights? Just looking at it has me scratching my head. :confused:

Re: Tamiya leds in PMD double squares, How!?
 

Do you have a milling machine or at the very least a Dremel and a vise? I had to mill mine out for my Bud truck. Kind of a tricky job without marring the polished surfaces. 1/8" endmill and a very slow and steady hand on the hand wheels did the job. I don't really want to try with a Dremel but it could be done with a carbide burr and a vise.
Hope this helps!

Lynn

Re: Tamiya leds in PMD double squares, How!?
 

what about flat topping the led?

Re: Tamiya leds in PMD double squares, How!?
 

With some coaching from Rod (stepside) i did mine by drilling them out until the bulbs fit. Now, I used the 3mm bulbs not the 5mm. the 5's would be impossible.
good luck !

Brian

Re: Tamiya leds in PMD double squares, How!?
 

Re: Tamiya leds in PMD double squares, How!?
 

Thanks guys, now I know how, the prospect of fitting them leds is a little less daunting. Much appreciated.

Re: Tamiya leds in PMD double squares, How!?
 

I know I'm digging up an ancient topic but I finally fitted the leds in my pmd double squares Friday night. Brian, thanks man, I did just as you said and it worked perfectly! I'm really happy!

Re: Tamiya leds in PMD double squares, How!?
 

Thats great news!

Brian