RC Truck and Construction

RC Truck and Construction (https://www.rctruckandconstruction.com/index.php)

- General Discussion (https://www.rctruckandconstruction.com/forumdisplay.php?f=12)

- - help!!!!! (https://www.rctruckandconstruction.com/showthread.php?t=6897)

cosworth34677

05-06-2013 08:45 PM

help!!!!!

ok i just flashed my flysky9x with the er9x fireware, and nothing is working?
i think its bond? i dont get and movent at all . the radio boots and the it looks like is working but there is no movment in the servo esc or any thing. any help? do i have to bind it again? is there something im missing? help guys please !!!!!

dabears

05-06-2013 09:27 PM

Re: help!!!!!

Not sure on flysky or the software flash but good bet you would want to try re binding and see what happens

cosworth34677

05-06-2013 10:20 PM

Re: help!!!!!

i got it to work . i just don't understand the new program yet

Brel	05-07-2013 01:44 AM

Re: help!!!!!

Quote:

Originally Posted by dabears (Post 86298)

Not sure on flysky or the software flash but good bet you would want to try re binding and see what happens

I re-flashed my flysky9x and did not think to rebind the receiver at all , in fact I did not rebind the receiver at all it just worked straight away

I use all 8 channels on my skip truck also fitted the smarty parts board and back light to the TX then I re flashed the firmware with eR9x and it runs great I used eepe on my pc to set up the truck again the uploaded the settings to the TX

cosworth34677

05-07-2013 11:26 AM

Re: help!!!!!

Quote:

Originally Posted by Brel (Post 86324)

well in need to know how to run the mixes? i need to mix my pump (ch5) with the boom stick and bucket(ch1,ch2,ch3) and also how to turn off (ch3,ch2) so i can run my tracks from a thought sticks by flipping a switch. i wasnt it to do everting thats in this vid

http://www.youtube.com/watch?v=We9G2qhUNKU

All times are GMT -4. The time now is 04:12 PM.