RC Truck and Construction - Cutting sleeper?

RC Truck and Construction (https://www.rctruckandconstruction.com/index.php)

- General Discussion (https://www.rctruckandconstruction.com/forumdisplay.php?f=12)

- - Cutting sleeper? (https://www.rctruckandconstruction.com/showthread.php?t=8377)

bigmudbronco

02-11-2014 09:26 PM

Cutting sleeper?

How much do u cut out of the sleeper to make it a 48 inch sleeper? And what body work bondo is the best to use? And anything else I forgot. Thank you

Lmackattack

02-11-2014 09:37 PM

Re: Cutting sleeper?

3.42" long would be a scale 48" in 1/14 scale

I use a band saw set with a guard to guide a nice straight cut. Use auto bondo or tamiya white filler. Lots of sanding,dust and patience !

Radio Control Trucker

02-12-2014 03:36 AM

Re: Cutting sleeper?

Quote:

Originally Posted by Lmackattack (Post 104247)

3.42" long would be a scale 48" in 1/14 scale

Lmackattack's right about the measurement :), it's an actual 3.4285 inches. I suggest cutting it to a 3.4375 or 3 7/16 inches.
It makes it easier to measure for cutting and no one will notice the difference.

- RCT

TRUCKMAKER

02-12-2014 07:19 AM

Re: Cutting sleeper?

Take a few minutes, which will turn into hours:lol: and read through this section of the forum, the knowledge and experience here is priceless!

http://www.rctruckandconstruction.co...f=5&order=desc

Stuff

02-12-2014 02:45 PM

Re: Cutting sleeper?

A guide is your friend! nothing like an offset cut to really cheese a guy off!

All times are GMT -4. The time now is 06:14 AM.