Lockers
 

ive been looking at the locker rear ends ,the ones that are supposed to be able to lock and unlock..i see what appears to be wires coming from the rear end housings,what are they and how do they work?

Re: Lockers
 

Typically the wires pull a lever to pull the diff lock in. You pull the wires via a servo mounted elsewhere(in the centre of the frame, in a fuel tank etc)...

http://i262.photobucket.com/albums/i...IMG_0678-1.jpg

In the above photo you can see the White arms of the diff lock servos (1 for the rear axles, and one for the front).

Cheers,
AP

Re: Lockers
 

The lock and unlock via a cable controlled lever operated by a micro servo or manual lever.

In my opinion, our trucks if used in the off road are best to be locked in full time. This can be done for free with stock tamiya rears and diff internals.