RC Truck and Construction - dump truck angle problems

RC Truck and Construction (https://www.rctruckandconstruction.com/index.php)

- Truck Building Tech (https://www.rctruckandconstruction.com/forumdisplay.php?f=4)

- - dump truck angle problems (https://www.rctruckandconstruction.com/showthread.php?t=9413)

cosworth34677

09-04-2014 08:50 PM

dump truck angle problems

ok i just redid a truck of mine and added a dump bed to it that was longer then the old one. know i have a angle problem, the ram doesn't sit low enough to push up on the bed. it just pushes it back and binds. so what do you do when you run out of room and cant go any lower with the mounting point?

fhhhstix

09-04-2014 08:56 PM

Re: dump truck angle problems

Pics we need Pics

The length of the bed has nothing to do with it not lifting. You have changed something in the geometry to make it not dump any more.

cosworth34677

09-04-2014 09:01 PM

Re: dump truck angle problems

well the bed sits lower then the old one on the frame. and the ram sit about a half inch back from the old setup

fhhhstix

09-04-2014 09:24 PM

Re: dump truck angle problems

Quote:

Originally Posted by cosworth34677 (Post 116317)

well the bed sits lower then the old one on the frame. and the ram sit about a half inch back from the old setup

Then move the bed back up then you will get the angle back.

All times are GMT -4. The time now is 05:11 PM.