RC Truck and Construction - Shapeways products

RC Truck and Construction (https://www.rctruckandconstruction.com/index.php)

- General Discussion (https://www.rctruckandconstruction.com/forumdisplay.php?f=12)

- - Shapeways products (https://www.rctruckandconstruction.com/showthread.php?t=9747)

bhaagjr

12-01-2014 08:05 AM

Shapeways products

Im ready to order some parts from Shapeways and I need some help. Im going to order the Pete hood, fenders and cab for now. My question is what plastic to go with. It shows two styles, both are listed as "white, strong, and flexible". But one also listed as polished. Witch one would require less prep work? Its odd that the polished parts are less expensive than the non polished. Thanks for the help and advise. Buddy

bigford

12-01-2014 01:59 PM

Re: Shapeways products

my fenders were ordered before you got a choise, there
gritty and need multi sand and prime .now there smooth.
start off with the smooth finish

Izzy	12-01-2014 09:19 PM

Re: Shapeways products

Is there any funny things like
poly styrene
nylon
abs
polycarbonate
???

Tamiya Cowboy

12-15-2014 06:25 PM

Re: Shapeways products

I have several hoods cabs and fenders now from shapeways all I have had to do it take it down with a little 400 then do a coat of high build primer then sand again with 400 then seal and paint super easy and have had zero issues it all.;

bhaagjr

12-15-2014 06:31 PM

Re: Shapeways products

I guess I'll find out in the next few days. I ordered the Pete hood, finders, and cab. Cowboy, can you tell me what products you use? Thanks

Tamiya Cowboy

12-15-2014 07:49 PM

Re: Shapeways products

all auto body coatings I use Dupont and Nason products mostly

bhaagjr

02-04-2015 10:46 AM

Re: Shapeways products

I ordered the Pete cab, hood and finders from Shapeways. The items came in and when I started checking the parts out I found the bars in the side windows for the vent glass were missing. I contacted Shapeways and they looked into the issue. They said they found the issue and would replace the cab at no charge. Well the new cab came in the same way. Has anyone here ordered the Pete cab and did you have any issues with it?

bigford

02-04-2015 12:42 PM

Re: Shapeways products

is the cab a 379 or a389?

bhaagjr

02-04-2015 01:58 PM

Re: Shapeways products

Looking at the web page it does not say what cab it is. The description is PETERBILT STYLE CAB (TS-BD-0007). The pictures on the web show the window bars.

bigford

02-04-2015 02:30 PM

Re: Shapeways products

i just remember he lists the 389 headlights.thats why i ask
you could make a big window 379 and it would be correct

All times are GMT -4. The time now is 06:51 PM.