Well some updates.
1 - Got the rear suspension mounted correctly.
2 - Junfac Highlift lockouts installed. These fit PERFECT!
3 - My lift arrived. Overpriced but as the scale world goes, you pay for what size you need it to be.
4 - Moved the lift farther back and down, Made up the rails for the lift using 1" flat aluminum. used leftover braces but of course, where I put them isn't where the lift wanted them. I also used left over shock supports from the globe and a highlift for rail guides.
5 - Guess I didnt take a picture of it but for the rear, because my lift rails don't just end at the end of the truck's chassis, I had to go farther. So I flipped the bumper crossmemeber, used the lower shock mounts from a front axle of the semi, used standoffs for highlift suspension, and some new hardware from my KHK hardware bundle I bought and got the rails pivoting now! So now I need to figure out how to attach the lift top half and go from there. Lift used 4mm hardware to mount at the top side so I will have to see how that goes. I also mounted the fuel tank. It is leftovers from the MFC parts tree. Had to shave off the top and bottom of the [ brackets so now they are just | and used couple screws from behind the frame to secure it. not like its gotta hold anything. just look perdy lol.
