Quote:
Originally Posted by thebat
the grand hauler is look great man question what did you do for all those lights under the cab doors an sleeper
|
First off I had to lower the steps with longer screws and some spacers out of an old k'nex set. Then made plastic spacers that were screwed to the floor of the cab and sleeper. I made the light bars out of 1/2 inch alum. angle with 1/8 inch holes drilled for the 3mm LEDs. I wired the LEDs in series of 4 and hooked them to a battle switch that is mounted in the passenger step. Then I screwed them to the plastic spacers. Also had to relocate the antenna inside the sleeper because the spacers covered up the hole.