View Single Post
  #4  
Old 09-04-2016, 09:49 AM
TRUCKMAKER's Avatar
TRUCKMAKER TRUCKMAKER is offline
Big Dawg On The Bone
 
Join Date: Aug 2011
Posts: 1,652
TRUCKMAKER is on a distinguished road
Default Re: CrackerBox Test Chassis

Quote:
Originally Posted by frizzen View Post
That's pretty cool than you can do that flat of a drivetrain.

Is the steering tierod too short, or is it just the picture angle?
Hi Frizzen, no it's not too short, it's just not adjusted yet, I also straightened the tie rod out and removed the front shocks. I found, after deciding to build a Crackerbox and got some critical dimensions online that I had to move the axle forward.

Quote:
Originally Posted by Mikem View Post
Hi Kent would you share what motor you have in your truck ? Thanks .
Hi Mikem, I get them from Servo City, the one in the chassis is 437 RPM. I have one in my dump truck connected to the screw drive, it's 313 RPM and a 165 RPM on the shelf, I ran it in my dump for a while but thought it was too slow, all kinds of power though. I have to give credit to Reg (RPC57) for the motors, I found them in one of his threads and he told me where to find them.

https://www.servocity.com/motors-act...ry-gear-motors
Reply With Quote