View Single Post
  #18  
Old 12-04-2017, 09:08 PM
DrDiff DrDiff is offline
Newbie
 
Join Date: Sep 2017
Location: Valparaiso, Indiana
Posts: 135
DrDiff is on a distinguished road
Default Re: Beier sound controllerand light setup

Quote:
Originally Posted by gismow View Post
Hi...

on the upper right you connect the module to the receiver resp. other modules.

From top to bottom:
- Prop#1 upper: Cable from the receiver (gas)
- Prop#1 lower: Cable to the ESC
- Prop#2 uppper: Cable from the reveiver (steer servo)
- Prop#2 lower: Servo cable
- Prop#3: Optional : If you want to want to use e. g. the EKMFA
- Prop#4: Optional

The cabeling for Prop#2 is only needed if the turning lights should be turned off by the steering or if the curve lights (correct word ?) should be used.
Yes, I want Turn signals to function.
__________________
Dean Cory
Knox, IN
Reply With Quote