The front springs didn't quite line up with the mounting holes so KK Trucks printed some new ones for me, they fit a treat!
I wasn't happy with any of the transfer boxes I could find so I decided to make my own with 2.6:1 reduction.
Here is the V1 Solidworks CAD mock up.
1st prototype transfer box printed and test fitted. Gear mesh was too tight, too close to the cab floor and holes slightly out of line.
Version 4 of the transfer box case... All bolts up snug now.
Transmission is on 20mm raised stand offs.
Just got to wait for the props to turn up now!