RC4WD/Eagle 360L Channel Mixing Oddity Occurring
Hello,
When I created a mix for these three channels I am only getting "pump off" movement with the bold control stick movements. I am at a loss why the others arent working...
Boom is on ch 1 (pull = up / push = down)
Bucket is on ch 2 (Left = curl / Right = uncurl)
Stick is on ch 3 (pull = in / push = out)
Mix 1 for Boom
"ON"
Master: ch 1
Slave: ch 5 (the pump)
Offset 0
Positive 100
Negative 100
Mix 2 for Bucket
"ON"
Master: ch 2
Slave: ch 5 (the pump)
Offset 0
Positive 100
Negative 100
Mix 3 for stick
"ON"
Master: ch 3
Slave: ch 5 (the pump)
Offset 0
Positive 100
Negative 100
Any help would be greatly appreciated!
Last edited by Paulie; 07-03-2022 at 06:06 PM.
|