[Tamiya Cowboy]

Originally Posted by russisloud

its all down hill after you start buying kool tools....

keep up the good work, theres alot you can't learn in skool. somethings just have a "feel" to them.

Hey Russ Tristin says Thanks Much. And you are very right sometimes better to learn by feel of doing it that is for sure..

Well he got a bunch more done this week and tonight..

First off the new box supports are all welded in and seams ground and buffed and also recoated the hole bottom of the box one more time with POR..



Missing the finished pick Ill get it tomorrow.

He also got the rear drums wire wheeled and POR'ed.

Now this winter we will be doing a rear disk break swap so more to come there..


And then he mounted them on the truck just to see how they looked.

Now also I got the new style center caps for the wheel from the salvage yard and I used a 4 inch hole saw to cut the centers out of the front. Now to do this you have to order new lug nuts but you can get them from Dolmar 16-6116 is the part number..

Fronts

Rears


Ok more to come it should be moving along faster now. I am going to go to the paint booth with the front and rear bumpers and the hood this week..