Re: rc4wd excavator query
Hey i have this model, leave your sticks on mode 1, but the remote should be in glider mode not heli and mine is in ppm from factoy not pcm
now my model is version 1.5 so a couple thing's may be different like my light switch etc. but if you give more info i may be able to give more help
and for your tracks (im assuming your replacement remote is this same as the one you broke, custom with the spider legs)
goto menu, then function settings, goto last one aux-ch should read as follows
ch 5 - thro hold
ch 6 - hov pit
ch 7 - hov thro
ch 8 - gear
ch 9 - null
ch 6 & 7 are your tracks, ch 5 is your pump ch 8 on mine is the fourth servo pressure release (dont know if you have same version)
other channels are as follows
ch 1 - ail - boom swing
ch 2 - ele - front boom +/-
ch 3 - arb - main boom +/-
ch 4 - rud - bucket +/-
and you should have three mixes active one for each ele, arb, and rud in that order all masters, slave for all is aux, offset for all is 100, uprate for all is 100, onrate for all is -100, all sw = nor
for e. point adjustment (3rd in function list), the 5th one (flp) is your pump mine is 024% on 000% off from factory haven't adjusted anything yet
if i can be of any more help let me know
Trevor
*edit* the slave mix for all three mixes is the first aux not the second
Last edited by tman1986; 01-24-2012 at 02:38 PM.
|