Re: anyone ever use these u-joints
I'm pretty sure the boat drives are only 4mm So those would be pretty small openings.
It looks like 4mm is correct, here's the link right from your page for the shafts that go to those
http://www3.towerhobbies.com/cgi-bin...?&I=LXVUX9&P=M
--Dan
__________________
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Last edited by scalelover; 07-18-2012 at 09:08 PM.
Reason: Added link
|