Re: Paint?
Steve...
I'm no expert on paint, but here is my advice: strip it down. Why? Because the frame and some other support bits are metal, the tranny case (and axle cases) are that black plastic (some form of styrene, as MEK works on it)
A good metal paint may be the wrong one for the plastics, and vice-versa. Not to mention that you paint it assembled, you'll end up with paint in bolt heads, and such. Plus you'll want to clean the parts well before painting, and perhaps lightly sand the frame-rails for added adhesion.
Let me guess, Cat yellow for the tranny case, and mebbe for the frame? Or am I way off. I dunno if its good for both, but I can check my can of it (from the local Cat dealer)
WhiteWolf
|