you are telling me. scaled it all properly for the veroma tracks and idlers.
here is a better idea of how it is going to sit. their sprocket uses 8mm bore but i will run 6mm like the idler and sleeve bearing it in the middle so it comes out to 8. then use the set screw to cap onto the 6mm shaft itself (my chain sprockets and hubs et all are 6mm so thats why going 8 would be harder than going from 6 to 8 on the sprocket itself). and a bunch of other boring stuff nobody cares about that i will be working around in the coming weeks.
14" long by 12" wide (outside to outside of tracks). I love oversized demolition bodies and that's what i am making.