Quote:
|
...so I'm not sure if I can run the track functions on one stick, and the bucket/loader on the other. I think that is how I would like to do it, if possible.
|
That´s the setup I drive. The left stick is acceleration and steering, the right one for the arm/bucket. I also used a mixer to combine the channels hyd valve (f.e.3+4) with the one off the pump(f.e.5). So if I move the right stick the pumps rpm rises proportional. That saves a lot of battery. If I want constant hyd pressure I can set the rpm with an prop channel.
bye
Ulrich