Thread: Bob's M1070
View Single Post
  #10  
Old 07-23-2013, 11:48 PM
doodlebug's Avatar
doodlebug doodlebug is offline
Big Dawg On The Bone
 
Join Date: Dec 2010
Location: South 40 Swamp, Utah
Posts: 2,398
doodlebug is on a distinguished road
Default Re: Bob's M1070 (maybe)

Quote:
Originally Posted by kingbob View Post
Sounds like you're on the same page as me. Ive got the hobbyboss kit on its way as a reference as well, great minds think alike.

I was looking at the 1.55" rock crushers as they are 94mm, and the real tires are 53" which at 1/14 scales to 96mm. At 1/16 they scale down to 84mm but I couldnt find tires that size. I assume that yours are the 1.9"s if they have 19 Written on them which are 110mm tall.

At 1/14 it should be 25.5" long. At 1/16 should be 22.3" long.
Width at 1/14 is 7.2" and at 1/16 should be 6.3" wide.

So yours must be closer to 1/10 or 1/12.

I know tlt axles are 180mm/7" wide at the outside of the hex so depending on wheel offset it should be pretty close if the tires arent too wide.

My main issue at the moment is working out the width difference between tlt axles and semi dual output axles. The semi axles are narrower so getting the wheel width to match is what im trying to work out. Would appreciate any help if you've already sorted that issue.
http://www.the-blueprints.com/bluepr...rucks/oshkosh/
http://www.the-blueprints.com/bluepr...osh_het_m1070/ Does this help any?
Cheer's, Neil.
Reply With Quote