Thread
:
ScaleART - Assembling a MAN TGX/XL 6x6 tractor & Trailer
View Single Post
#
14
11-01-2015, 10:30 PM
Rakthi
Apprentice
Join Date: Apr 2014
Location: Back in Belgium
Posts: 476
Re: ScaleART - Assembling a MAN TGX/XL 6x6 tractor & Trailer
Found the time to trim the bowden cable attachment points on the rear axles.
I drilled a 1.5mm hole too. I figure it will give me more options to attach the bowden cable later on.
Both axles installed and no longer touching the air suspension where I trimmed the attachment point.
Because I have a driven axle for the front suspension, I had to remove the screws I installed to mount the spacer.
I have not used Loctite yet. Due to the air suspension, the whole thing will have to come apart again later for painting.
__________________
Cheers, Stephan (Rakthi is the one in the avatar)
Rakthi
View Public Profile
Find all posts by Rakthi