Doors - Part 2
Not really the doors, more the sides of the cab.
The black plastic strip is fastened with 3 self tapping screws
Next we screw in the galvanised iron screw that the magnet will stick too. (I cut that one in half, half way thru screwing it in it became pretty hard to do, and worried my screwdriver might slip out of the slit resulting in a big scratch ...
Next the fender/step part of the cabin. Held in place with one regular M3 screw and 2 self tapping ones. The indicator lights i painted orange yesterday and trimmed and fitted them already.
Both sides finished, the right side has the extension on the black plastic for the dead angle mirror.
Next step will be the front of the cabin that will hold these two bits together.