3300kv x 12v / 11 = 3600rpm ..is that how it goes?
A 12v battery would be 13.5v, there abouts with a full charge = 4050rpm
5/32 is about 4mm, which may likely be 2.5mm ID.. virtually the same as I have.. but your hyds movement is so much slower.
I run on 4s lipo... 600kv x 16.8v / 2.5 reduction = 4032rpm
I'm at approx 24-26 bar. (manual suggested not to exceed 25bar)
I watched a vid of my 850 from last summer when I just got it running, the movement is noticably slower than it is today.. it must be just the way I tweaked the radio settings, can't think offhand what other variable there might be.
You could set your gear channel to be 20% to 50% when "on" and the Mix will boost it to maxium speed with 2 hyd channel movements.
I don't know, maybe I'm talking out of turn here and you don't want it different than it currently is.. ?