Thread
:
LilGiantsConstrCo
View Single Post
#
1682
09-30-2018, 12:29 AM
Lil Giants
BANNED
Join Date: Aug 2010
Location: Saskatchewan
Posts: 4,431
Re: LilGiantsConstrCo
Getting ready for the winter dig season
Swing motor had a bit of wobble in its mount plate
Added some blue locktite to the bolts & let dry before installing bolts
Not sure if I got a leak or if I'm just pushing the oil too hard making it weep every so little from somewhere... couple yrs ago I changed Jung pump from model# 4002 to 4003 increasing flow 30% to 1.8L/min, a definite improvement to move boom - stick - bucket simultaneously with good speed & no cavitation. Not touching pressure from where it was set with older pump, the pressure did go up to nearly 40Bar...
Lots of Q-tips & toilet paper, I got it pretty clean again. Can't see any notable leaks & have never had any significant volume drops in short periods of time the last yr.
Put it back together & it's off to the tunnel to finish digging out the walkway area... year #8 for the Beast
If I were to guess the hrs, something close to 1600
__________________
Sharing knowledge is one thing that defies basic arithmetic logic --- the more you share, the more you get!
Joe
Lil Giants
View Public Profile
Find all posts by Lil Giants