Re: What am I missing!!!
Mario Travis has hit it right on the head. I have used this trick for years on my 1:1 show truck the only difference is I use baby powder cause it is finer than flour. the haze is just left over polish sticking in the grain of the aluminum where a rag can't get it. the powder acts as a super fine grit sanding agent and pulls that out of the cracks and can sometimes even remove the fine cracks. just a nice light rub in the direction of the grain works great. also use either a microfiber rag or a cloth baby diaper any other type of material is to course and can scratch the finish.
__________________
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Mike "DREAMWEAVER" Johnson
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
RIP FreddyGearDrive 2-12-59/12-19-11
Rims and Tanks by ihbuilder / Grill and Visor by Brian in PA / Mirrors, Front and Rear Bumper, Back of Cab Lights, and Steering Arms by tc1cat / Fenders by Stylin n Profilin / Frame Rails by The Late Freddy Gear Drive
|