RC Truck and Construction  

Go Back   RC Truck and Construction > RC Truck's Kings of the Road > Euro Style Trucks and Trailers

Euro Style Trucks and Trailers A place for the Euro style trucks single and twin axle trucks and trailers...


Reply
 
Thread Tools Display Modes
  #1  
Old 10-03-2020, 12:00 PM
Benni Benni is offline
Newbie
 
Join Date: Jun 2019
Location: Tiny Island in the Atlantic Ocean
Posts: 42
Benni is on a distinguished road
Default Scania 112

Hi

After getting my robot pooping machine up and running, broken it, fixed it, up and running again and dialed in, it's been pooping almost nonstop.
There has been many failed prints so far and I'm still learning. How this will end up I'm unsure, might need to design and print again from scratch.

But this is where I'm at, my first project in years, first in 1/14 scale and first building anything as complex like this. Although I'm designing few projects this is the one I'm farthest along with.

Scania T112H
Why? After I got my truck License that was the truck I start working on and drove for about year and a half, a piece of **** but had so much character and thought me so much.
As for drive line I haven't decided anything yet but I'll probably end up ordering a simple kit of hercules hobbies or something similar.



There are a few reasons I don't expect this to be a quick build, time being one but money being the bigger one.
If I'm lucky I'll some sort of a chassis next year but until then I'm just using what I can get my hands on...
Reply With Quote
  #2  
Old 10-18-2020, 05:29 PM
Benni Benni is offline
Newbie
 
Join Date: Jun 2019
Location: Tiny Island in the Atlantic Ocean
Posts: 42
Benni is on a distinguished road
Default Re: Scania 112

Well, I did managed to get my robot to poop a little bit more plastic and this is where I'm at.

Over 30 hours of printing just for the hood, original has a flip forward hood and I'm replicating that with brass hinges and magnets to keep in place.
A little design error regarding the magnets; not enough material above the magnets so it didn't print, I'll guess it will be just filler and paint over it...

The roof is still just a test piece needs to be modified a little bit, work in progress.

The driver is just a forklift driver I found on Thingiverse, don't know yet if I'll use it.

Can't do much more until I order more plastic (which takes at least 2 weeks to arrive) and more parts show up.

Reply With Quote
  #3  
Old 10-19-2020, 06:59 AM
frizzen's Avatar
frizzen frizzen is offline
Big Dawg On The Bone
 
Join Date: Jan 2016
Location: indy, indiana
Posts: 2,040
frizzen is on a distinguished road
Default Re: Scania 112

This looks like it'll be an interesting one to watch come together.

Your pooping robot seems to do good work
__________________
What do ya mean "Cars are neither Trucks or Construction"?
It's still scale, and i play fairly well with others, most of the time...
Reply With Quote
  #4  
Old 10-19-2020, 03:54 PM
jerry56 jerry56 is offline
Craftsman
 
Join Date: Apr 2019
Location: WV Panhandle
Posts: 761
jerry56 is on a distinguished road
Default Re: Scania 112

I like seeing folks building something different... look forward to seeing this one come together.
Reply With Quote
  #5  
Old 10-20-2020, 06:31 AM
Benni Benni is offline
Newbie
 
Join Date: Jun 2019
Location: Tiny Island in the Atlantic Ocean
Posts: 42
Benni is on a distinguished road
Default Re: Scania 112

Thanks guys, even though it's starting to come together I'm always worried if I was a bit too ambitious since I've never attempted anything like this, but We'll see.

I don't want to design/print too much until I have the parts in my hand, need to have the "feel" for them.
Reply With Quote
  #6  
Old 02-19-2021, 05:42 PM
Benni Benni is offline
Newbie
 
Join Date: Jun 2019
Location: Tiny Island in the Atlantic Ocean
Posts: 42
Benni is on a distinguished road
Default Re: Scania 112

Not much has happened here the last few months, life keeps getting in the way.

I wasn't quite sure about the strength of the cab, afraid it was too thin, so I did a little stress test.

The test involved giving it to my son(3)
And this was the result after just 3 minutes.

[IMG]IMG_20210219_221751 by Benedikt Bj. Kristjánsson, on Flickr[/IMG]

As I was expecting, too many week points. Also, mostly just too thin (0.5mm in some places)
Have been redesigning a lot but not been able to print anything yet
Reply With Quote
  #7  
Old 03-05-2021, 12:38 AM
skeeter skeeter is offline
Big Dawg On The Bone
 
Join Date: Jul 2017
Location: Washington State
Posts: 1,732
skeeter is on a distinguished road
Default Re: Scania 112

3D printing is a challenge to master! I've been at it on/off for a few years now, & I still struggle with it.
Reply With Quote
  #8  
Old 03-05-2021, 05:17 PM
Benni Benni is offline
Newbie
 
Join Date: Jun 2019
Location: Tiny Island in the Atlantic Ocean
Posts: 42
Benni is on a distinguished road
Default Re: Scania 112

Challenging, yes. But rewarding.
I've only had my printer for a year and so far only run 4 rolls though it. My biggest problem on anything hobby related is availability, there is no one locally selling (unless it's really popular) so I need to order everything overseas with sky high shipping and customs tax...
Also, I can't print good quality until I do something with the aluminum bed, it's warped.

Thinking back, the biggest fail I did was designing too much before I got the printer. "I can design this now and then I'll just send to the printer when it arrives, it's easy"
Man, was I wrong... But did learn a lot from that mistake.
Reply With Quote
  #9  
Old 07-25-2021, 09:11 AM
Benni Benni is offline
Newbie
 
Join Date: Jun 2019
Location: Tiny Island in the Atlantic Ocean
Posts: 42
Benni is on a distinguished road
Default Re: Scania 112

After months of not being able to produce any thing (family & finances) I did score a little bit of plastic.
Enough to print most of the parts I had to redesign.

[IMG]IMG_20210725_134622 by Benedikt Bj. Kristjánsson, on Flickr[/IMG]
[IMG]IMG_20210725_134602 by Benedikt Bj. Kristjánsson, on Flickr[/IMG]

This is the only plastic available here (polariod), quite expensive, about 50USD. So ordering from Denmark is still the best option.
The joy of living in the middle of nowhere...
Reply With Quote
  #10  
Old 03-24-2022, 05:02 PM
Benni Benni is offline
Newbie
 
Join Date: Jun 2019
Location: Tiny Island in the Atlantic Ocean
Posts: 42
Benni is on a distinguished road
Default Re: Scania 112

Progress has been really slow and when I thought about posting an update the site crashed.
Thankfully it's back.
Sorry for the pictures are a bit blurry, dropped my phone the other day and cracked the glass



I redesigned and reprinted most of the cab, and also tried to make an axle.
Found some metal in the house and turned into the frame with temporary crossmember, the suspension is still a "work in progress"



And because there aren't just big trucks on the road I have been working on a little side project.

Design error and failed print makes the roof look "silly"
Reply With Quote
  #11  
Old 03-25-2022, 09:19 AM
frizzen's Avatar
frizzen frizzen is offline
Big Dawg On The Bone
 
Join Date: Jan 2016
Location: indy, indiana
Posts: 2,040
frizzen is on a distinguished road
Default Re: Scania 112

Those new scania parts are looking good! Hopefully there's less sanding.

Trying to 3d print the waterbug is really hardcore! I totally would have wimped out and gone to look at Rastar or some of the other toys that were released when the car was.
__________________
What do ya mean "Cars are neither Trucks or Construction"?
It's still scale, and i play fairly well with others, most of the time...
Reply With Quote
  #12  
Old 03-26-2022, 02:41 PM
Benni Benni is offline
Newbie
 
Join Date: Jun 2019
Location: Tiny Island in the Atlantic Ocean
Posts: 42
Benni is on a distinguished road
Default Re: Scania 112

Finding a toy and convert would be a lot easier, yes. But I'm obsessed with keeping things within the same scale. Also the main purpose of this, it's supposed to end up as a birthday/christmas present.

There will always be a bit sanding but seems like minimal, even less now after I changed to a 0,2mm nozzle.
Reply With Quote
  #13  
Old 06-10-2022, 06:29 PM
Benni Benni is offline
Newbie
 
Join Date: Jun 2019
Location: Tiny Island in the Atlantic Ocean
Posts: 42
Benni is on a distinguished road
Default Re: Scania 112

Slow but some Progress.

Been trying out something new.
Ordered a few pull-start recoil springs to see if I could make a set of leaf springs.


Looks good for first attempt I think but might be a bit too long. We'll see.


I also redesigned the grill, the old one was ok, but this one looks better.


Just a kitchen strainer cut to size, a black sharpie and a small frame to hold it in place.


The first version of the dumper bed. Printed in sections so it's easy to shorten/lengthen it if needed, hold together with 6x m4 rods.
It's a little crooked due to crappy printer bed but it kinda looks old, tired and used.

Last edited by Benni; 06-10-2022 at 06:32 PM.
Reply With Quote
  #14  
Old 06-11-2022, 02:07 PM
egronvold's Avatar
egronvold egronvold is offline
Big Dawg On The Bone
 
Join Date: Dec 2010
Location: Conshohocken, PA
Posts: 1,445
egronvold is on a distinguished road
Default Re: Scania 112

It’s looking great!
__________________
Emil G | MFZ Blocher Fendt 926 | RC4WD Volvo EC480 excavator | Carson LR 634 | Kenworth 6x6 hauler | Kenworth 6x6 dtrk
My channel:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Construction site on Facebook:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Pictures on Instagram:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote
  #15  
Old 06-11-2022, 03:46 PM
jerry56 jerry56 is offline
Craftsman
 
Join Date: Apr 2019
Location: WV Panhandle
Posts: 761
jerry56 is on a distinguished road
Default Re: Scania 112

I like the look... Glad to see this coming together...
Reply With Quote
  #16  
Old 06-11-2022, 08:25 PM
Zabco Zabco is offline
Green Horn
 
Join Date: Sep 2016
Location: Ohio
Posts: 253
Zabco is on a distinguished road
Default Re: Scania 112

Really very nice. What size starter spring are you using to make your leaf springs?
Reply With Quote
  #17  
Old 06-12-2022, 03:56 PM
Benni Benni is offline
Newbie
 
Join Date: Jun 2019
Location: Tiny Island in the Atlantic Ocean
Posts: 42
Benni is on a distinguished road
Default Re: Scania 112

Thanks guys.

The springs are just generic 5mm ones, bought 10x off Aliexpress.


I don't if I need to revisit the dumper mechanism.
Was hoping to get to 50-55 degrees but I'm not sure if will even reach 45

We'll see when I get more parts to do some testing.
I really need more parts, a lot more parts, haven't even bought tires yet...
Reply With Quote
  #18  
Old 11-07-2022, 10:59 AM
Benni Benni is offline
Newbie
 
Join Date: Jun 2019
Location: Tiny Island in the Atlantic Ocean
Posts: 42
Benni is on a distinguished road
Default Re: Scania 112

Well.
The progress for the last few months has been slow with the build, but still some.
Did managed to draw and print fenders for the rear and a simple bumper.


Last week some tires arrived and of course I had to try them out.
Fit the wheel well but way too wide to use on the rear axle.


And with so many small parts everywhere and always ending on the floor I ended up on making a better storage system.
So much more space on the worktable now, and easily expandable, which will happen.


I did make an error regarding the rear axle/boogie system where the inner tires would not fit anymore.
So now I'm at a standstill, do I redesign it all over again or do I upgrade it to a 6x4 model?
Even though that means ordering more parts I'm leaning more towards 6x4 since it be more capable offroad...
Reply With Quote
  #19  
Old 11-08-2022, 06:58 AM
kerst's Avatar
kerst kerst is offline
Apprentice
 
Join Date: Oct 2010
Location: NY
Posts: 471
kerst is on a distinguished road
Default Re: Scania 112

Looks good!

Kerst
Reply With Quote
  #20  
Old 11-08-2022, 08:53 AM
jerry56 jerry56 is offline
Craftsman
 
Join Date: Apr 2019
Location: WV Panhandle
Posts: 761
jerry56 is on a distinguished road
Default Re: Scania 112

Really starting to come together...
I agree with you order a couple more parts, maybe reprint something, before I would redesign the whole chassis....
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:25 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.