|
Highway Trucks and Trailers On road trucks and trailers single and twin axle trucks. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Mack Granite Wrecker
I got this from a good buddy of mine he took my wedico wrecker bed and turned it into a a great looking set up that I am now finishing up and getting running.. He built a chassis out of his parts bins and my parts bins using True Scale Rc rails and stock running gear with a RC4wd R2 and a 55 turn like I run in everything.
Now the servo is hid under the stock bruder motor. Here it is with the motor and hood installed. Now for those that know how the hood mount looks on a bruder cab you will see it is mounted backwards and is screwed to the stock king hauler front bumper mount..All this took was a little minor trimming then is just flipped around and upside down and clicked back in and screwed to the mount. Now using Russ's True Scale alum tank mounts I run into a issue with the Stock Globe Liner tanks hitting the shackle. So I took the stock tanks and glued the end cap on and then too it to the band saw. And then filled the tank back in with .030 plastic. Then to make it look better covered that with metal molders foil.. Here is the tank mounted with a alum air tank mounted on top of the fuel tank. Here you can see the light bar rack he built for the light bar I got and you can also see the stock king hauler stacks and how they are mounted.. Now the light bar is the perfect size and looks great only problem is they are red/blue up font and amber chaser in the rear.. Thanks for looking onto the bed and lighting and wiring up of the controls.
__________________
Paul W. "Tamiya Cowboy" HI.. My name is Paul.. And.. I.. Have a Cabover Addiction. RIP FreddyGearDrive 2-12-59/12-19-11 "LET IT EAT" Like Us on Facebook "Corn Field Mafia" To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#2
|
||||
|
||||
Re: Mack Granite Wrecker
Looks good so far, doesn't look like a Bruder cab. Can't wait to see the wrecker body.
|
#3
|
||||
|
||||
Re: Mack Granite Wrecker
Quote:
Here is some picks of the bed I am working on it some today. Wedico arm it is all built on a 1/8 alum plate so it has a rock solid base with Russ's bezels in it and I am wiring the lights now and mounting the esc and Rx and so on.. Started the wiring on it.. Enjoy..
__________________
Paul W. "Tamiya Cowboy" HI.. My name is Paul.. And.. I.. Have a Cabover Addiction. RIP FreddyGearDrive 2-12-59/12-19-11 "LET IT EAT" Like Us on Facebook "Corn Field Mafia" To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#4
|
||||
|
||||
Re: Mack Granite Wrecker
Looking good Paul. Gonna be sweet!
|
#5
|
||||
|
||||
Re: Mack Granite Wrecker
__________________
Paul W. "Tamiya Cowboy" HI.. My name is Paul.. And.. I.. Have a Cabover Addiction. RIP FreddyGearDrive 2-12-59/12-19-11 "LET IT EAT" Like Us on Facebook "Corn Field Mafia" To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#6
|
||||
|
||||
Re: Mack Granite Wrecker
cool little wrecker,paul
|
#7
|
||||
|
||||
Re: Mack Granite Wrecker
__________________
Paul W. "Tamiya Cowboy" HI.. My name is Paul.. And.. I.. Have a Cabover Addiction. RIP FreddyGearDrive 2-12-59/12-19-11 "LET IT EAT" Like Us on Facebook "Corn Field Mafia" To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#8
|
||||
|
||||
Re: Mack Granite Wrecker
Another build with you special touch Paul.. Great work..
Wayne |
#9
|
||||
|
||||
Re: Mack Granite Wrecker
that's legit. that mack looks killer with that bumper. also looks real good on russes frame rails
__________________
Grabbin gears and Rollin wheels ! LETS BLOW SMOKE!! Member of the Central Plains Mini Truckers,and a Minnesota road hammer. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Flat bedders do it with chains and straps,but now im yanking 53's To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#10
|
||||
|
||||
Re: Mack Granite Wrecker
Thanks much guys... Just got the ESC's in from Hobby King so now I can get going on it..
__________________
Paul W. "Tamiya Cowboy" HI.. My name is Paul.. And.. I.. Have a Cabover Addiction. RIP FreddyGearDrive 2-12-59/12-19-11 "LET IT EAT" Like Us on Facebook "Corn Field Mafia" To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#11
|
||||
|
||||
Re: Mack Granite Wrecker
Really like this build Paul
Great job Alfy
__________________
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Always Wheeling, Always Dealing ! |
#12
|
||||
|
||||
Re: Mack Granite Wrecker
this is coming along great ...man i got to get me a wrecker for my fleet .....great job as usual paul
__________________
owner/operator.."got to operate to own" dwayne |
#13
|
||||
|
||||
Re: Mack Granite Wrecker
Thanks Much Alfy
Thanks much Big D
__________________
Paul W. "Tamiya Cowboy" HI.. My name is Paul.. And.. I.. Have a Cabover Addiction. RIP FreddyGearDrive 2-12-59/12-19-11 "LET IT EAT" Like Us on Facebook "Corn Field Mafia" To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#14
|
|||
|
|||
Re: Mack Granite Wrecker
any update Paul?
__________________
Specializing in VW beetle water pumps! RIP FREDDYGEARDRIVE |
#15
|
||||
|
||||
Re: Mack Granite Wrecker
Hey Spudd not much I can take picks of I have just been wiring on and off on it I have been in a building slump Im trying to get back in my old building swing again..
__________________
Paul W. "Tamiya Cowboy" HI.. My name is Paul.. And.. I.. Have a Cabover Addiction. RIP FreddyGearDrive 2-12-59/12-19-11 "LET IT EAT" Like Us on Facebook "Corn Field Mafia" To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#16
|
||||
|
||||
Re: Mack Granite Wrecker
Paul did you have to move the front axle on the springs to get it centred in the hood wheel arches as most of the bruder mack conversions the hood sits alot higher above the top of the wheel ?
Cheers Tracy
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 Love my Kenworths To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#17
|
|||
|
|||
Re: Mack Granite Wrecker
Cool! I like it! I think that's why I like most about the custom RC world. With so many people that are into it, there's always something unique and different popping up!
|
#18
|
||||
|
||||
Re: Mack Granite Wrecker
Quote:
__________________
Paul W. "Tamiya Cowboy" HI.. My name is Paul.. And.. I.. Have a Cabover Addiction. RIP FreddyGearDrive 2-12-59/12-19-11 "LET IT EAT" Like Us on Facebook "Corn Field Mafia" To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#19
|
||||
|
||||
Re: Mack Granite Wrecker
Paul,
Do you have a picture of this truck completed or at least body and cab on chassis? |
#20
|
||||
|
||||
Re: Mack Granite Wrecker
Do you have Facebook I can send you some. My laptop is shot so I can't put picks up here anymore
__________________
Paul W. "Tamiya Cowboy" HI.. My name is Paul.. And.. I.. Have a Cabover Addiction. RIP FreddyGearDrive 2-12-59/12-19-11 "LET IT EAT" Like Us on Facebook "Corn Field Mafia" To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|