Gearmotor help

[pumptech]

Hey guys ,needing some help finding a good durable mini metal gear motor, would like the motor to be around 3/4 " in diameter ,highest torque possible ,6 to 12 volts ,around 100 rpm's ,not even sure if that size motor even exist.
Have looked and looked for those specs with no luck ,Would like to try to build a simulated cylinder with threaded rod.
The second link is something like I would like to build ,the motor on that link is discontinued
Thanks , Tommy


http://www.hsomerville.com/meccano/Caterpillar.htm
http://www.hsomerville.com/meccano/SDRams.htm

[fhhhstix]

Here is a link to a gear motor that is close to what you are describing but they are back ordered with no ETA. It is a PK22G series made by Hennkwell and Robot market place calls it a B104. Robot market place is the only place I have found them short of trying to order them from Hennkwell directly.

Click here

Travis

[pumptech]

Originally Posted by fhhhstix

Here is a link to a gear motor that is close to what you are describing but they are back ordered with no ETA. It is a PK22G series made by Hennkwell and Robot market place calls it a B104. Robot market place is the only place I have found them short of trying to order them from Hennkwell directly.

Click here

Travis

Hey thanks Travis ,have emailed the tech guys a few times for other things at RMP,may shoot them a email ,see if they can put me on the list for that motor.
Thanks again
Tommy

[fhhhstix]

Originally Posted by pumptech

Hey thanks Travis ,have emailed the tech guys a few times for other things at RMP,may shoot them a email ,see if they can put me on the list for that motor.
Thanks again
Tommy

Your welcome and let me know what they say as I need to get some more my self. I use them in the necks on my low boys.

Travis

[pumptech]

Originally Posted by fhhhstix

Your welcome and let me know what they say as I need to get some more my self. I use them in the necks on my low boys.

Travis

Hey Travis ,sent RMP a email . Here's there reply.Oh well ,will be next year before I can get to it anyway .


(We do not have email alerts for our backordered items. I can tell you that we will not have an eta for at least 4 months. You can check back in February, and we may have an update then. I do apologize I could not help you further.)

[Jw.]

Hey Tommy, I found these that are sorta close.

http://www.lynxmotion.com/p-580-plan...4mm-shaft.aspx

Oddball gear motors of all kinds can easily be found by ebay from china or overseas. Watch out for shipping. Search around for more of these and you may find something better. Here's some examples.

http://www.ebay.com/itm/Mini-Micro-D...item4ab91a3543

http://www.ebay.com/itm/12V-DC-100RP...21130900521%26

-Jeff

[pumptech]

Originally Posted by Jw.

Hey Tommy, I found these that are sorta close.

http://www.lynxmotion.com/p-580-plan...4mm-shaft.aspx

Oddball gear motors of all kinds can easily be found by ebay from china or overseas. Watch out for shipping. Search around for more of these and you may find something better. Here's some examples.

http://www.ebay.com/itm/Mini-Micro-D...item4ab91a3543

http://www.ebay.com/itm/12V-DC-100RP...21130900521%26

-Jeff

Hey Thanks ,Jeff , the first link for lynxmotion ,that is what i'm looking for ,
would be a good motor for drive wheels also ,for a tractor or something like that ,thanks again ,Tommy
May be able to get started on the cylinder before the end of the year ,lol

[fhhhstix]

The motor from lynxmotion is a hennkwell motor just the 231:1. They also offer the 62:1 but not the 104:1 which seams a little odd.

Travis