![]() |
|
Construction Equipment Tech Hydraulics, Electronics, General Engineering, ect in constr equip |
![]() |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
![]()
Joe or anyone else who has a thought on the subject,
What are people using for screen and what for the drum? I plan to start out screening sand. I have some gutter guard but it is a little to big to catch anything but the largest stones. I think I might end with that, but I'm gona need something finer to start out. For the drum, is PVC pipe the choice? I thought for my smaller scale maybe thin wall 3". Is there already a screen thread on the site? Jim Last edited by Rvjimd; 05-31-2013 at 01:26 PM. Reason: Typo |
#2
|
||||
|
||||
![]()
I used an air filter from a tractor, 275 Massey to be exact. Hole size is about 1/8th or lil bigger. Outer screen tube is about 4", inner screen tube is 2.5" or so. Soak the paper element with gasoline & lite 'er up!
![]() I think the filter's length was 18", you could cut out slots to then wire wrap your larger screening material onto as well near then end for another size seperation.
__________________
Sharing knowledge is one thing that defies basic arithmetic logic --- the more you share, the more you get! Joe |
#3
|
||||
|
||||
![]()
Look around the office supply section of your local Walmart or similar store. They almost always have garbage cans or file holders made with a pretty fine mesh. I have also seen people on this site recommend buying an old microwave at a yard sale and pull the mesh out of the glass door.
|
#4
|
||||
|
||||
![]()
Good ideas! I really like setting something on fire during the build!
![]() Guess I will probably hit walmart this weekend. I just don't have anything good in my scrounge pile. Jim |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|