|
Highway Trucks and Trailers On road trucks and trailers single and twin axle trucks. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Tamiya support legs fitted to a carson low loader
I saw on German EBay via the RCtrucking site, a Carson low loader fitted with a set of Tamiya motorised Support legs and decided to have a go at fitting a set to my Carson low loader trailer and here is the result, as you can see I had to move the king pin forwards to clear the motor of the support legs and shorten the rubbing plate and cut the frame rail nearest the legs motor. but it does not take any strength away from the trailer because most of the weight is supported by the sides of the trailer, the mounting brackets were made from a portion of a redundant Tamiya pole trailers frames and have been notched to get the legs as far back as possible and they are supporting part of the frame and not relying solely on the screws that hold the deck down to support the weight of the trailer, also they have been bolted thought the deck to hold them in place.
|
#2
|
||||
|
||||
Re: Tamiya support legs fitted to a carson low loader
Great looking mod you have done there brel..Nice work..
__________________
Paul W. "Tamiya Cowboy" HI.. My name is Paul.. And.. I.. Have a Cabover Addiction. RIP FreddyGearDrive 2-12-59/12-19-11 "LET IT EAT" Like Us on Facebook "Corn Field Mafia" To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#3
|
||||
|
||||
Re: Tamiya support legs fitted to a carson low loader
Thanks Tc
update I decided to move the support leg's operating switch from the support leg location to the frame of the trailer; I also decided to add 5mm to the bottom of the legs because on a solid floor as opposed to carpet the Scania's fifth wheel was too high to go under the trailer properly Last edited by Brel; 03-28-2011 at 08:52 AM. |
#4
|
|||
|
|||
Re: Tamiya support legs fitted to a carson low loader
what did you do with the old landing gear?i am looking for a set
nice job!!!!!!!!!! |
#5
|
||||
|
||||
Re: Tamiya support legs fitted to a carson low loader
the old legs are in the spares box
|
#6
|
|||
|
|||
Re: Tamiya support legs fitted to a carson low loader
if you want to sell them let me know
i know this isnt the proper place to post this but i just thought i would ask |
#7
|
||||
|
||||
Re: Tamiya support legs fitted to a carson low loader
Spudd you have a PM
|
#8
|
||||
|
||||
Re: Tamiya support legs fitted to a carson low loader
very nice conversion!
__________________
Rc's are like pringles. You can't have just one!! my YouTube is - To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Subscribe!! My Facebook - To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#9
|
||||
|
||||
Re: Tamiya support legs fitted to a carson low loader
Nice work. Having the electric legs on two trailers, I know how great an upgrade this is for your low loader.
|
#10
|
||||
|
||||
Re: Tamiya support legs fitted to a carson low loader
thanks for your kind words
|
#11
|
|||
|
|||
Re: Tamiya support legs fitted to a carson low loader
there arent any pics....
|
#12
|
||||
|
||||
Re: Tamiya support legs fitted to a carson low loader
that is because Photo-bucket upgraded their site and destroyed the links
|
#13
|
||||
|
||||
Re: Tamiya support legs fitted to a carson low loader
here are some pictures
picture links destroyed by photobucket due to thier new pollicy Last edited by Brel; 10-20-2017 at 01:44 AM. |
#14
|
|||
|
|||
Re: Tamiya support legs fitted to a carson low loader
Thx for posting up the pics, very good bud, nice job
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|