RC Truck and Construction  

Go Back   RC Truck and Construction > RC Truck's Kings of the Road > Highway Trucks and Trailers

Highway Trucks and Trailers On road trucks and trailers single and twin axle trucks.


Reply
 
Thread Tools Display Modes
  #1  
Old 05-25-2017, 02:58 PM
isreal11 isreal11 is offline
Newbie
 
Join Date: May 2017
Posts: 22
isreal11 is on a distinguished road
Default Newbie Custom King Hauler

Hi Guys, I've been eyeing the King Hauler truck for six years or so, finally broke down and bought one. Not knowing how these RC builds work, I figured 300 bucks would get me in on a fully functional stock truck. Then I realized there are no electronics, servos and radio's included. Long story short I'm waayyy over that now and just got started.

For some unknown reason the Tamiya trailers from overseas are half the length as the US trailers. My tractor was almost as long as the Tamiya pipe trailer so I extended it with aluminum sheet metal from my shop to make it scale to a 53' flat bed. I'm planning on making the hood open with a servo, add lights and sound, extended frame, add a cat engine, smoke option, and stick a driver in the cabin. My 11yr and 9yr old sons are excited about the build and cant wait to work on it.

Can somebody help me out on where I can buy some Peterbilt style front fenders. one of the guys made some resin ones. I'm trying to get a hold of the builder.


Reply With Quote
  #2  
Old 05-25-2017, 05:21 PM
FabOne's Avatar
FabOne FabOne is offline
Journeyman
 
Join Date: Aug 2010
Location: NW Ohio
Posts: 507
FabOne is on a distinguished road
Default Re: Newbie Custom King Hauler

Look'in GOOD!

Keep us posted.

-Terry
__________________
FabOne
NW Ohio
Reply With Quote
  #3  
Old 05-25-2017, 06:13 PM
TRUCKMAKER's Avatar
TRUCKMAKER TRUCKMAKER is offline
Big Dawg On The Bone
 
Join Date: Aug 2011
Posts: 1,652
TRUCKMAKER is on a distinguished road
Default Re: Newbie Custom King Hauler

Check out Shapeways.com for fenders.
Reply With Quote
  #4  
Old 05-26-2017, 09:09 AM
isreal11 isreal11 is offline
Newbie
 
Join Date: May 2017
Posts: 22
isreal11 is on a distinguished road
Default Re: Newbie Custom King Hauler


Thanks for the info guys! Finished putting reflective tape on the sides, and wired up the trailer. Planning on putting on a walnut floor today.
Reply With Quote
  #5  
Old 05-26-2017, 10:14 PM
isreal11 isreal11 is offline
Newbie
 
Join Date: May 2017
Posts: 22
isreal11 is on a distinguished road
Default Re: Newbie Custom King Hauler

Cut some walnut strips for the floor today. I decided to add two aluminium strips down the middle to make it more realistic. Trouble is the double sided tape isn't holding everything down properly. I might have to put in a couple tapered screws to hold the boards down tightly.
I'll think about it.
Bought some fenders off shapeways. Once I get them I'll start on the hood modifications.




Reply With Quote
  #6  
Old 05-27-2017, 04:15 AM
frizzen's Avatar
frizzen frizzen is offline
Big Dawg On The Bone
 
Join Date: Jan 2016
Location: indy, indiana
Posts: 2,040
frizzen is on a distinguished road
Default Re: Newbie Custom King Hauler

Looks like its coming along great. You're right' the trailer looks much better at 53'.

Would the deck hold better if you glued the planks edge to edge into sections before taping down?
__________________
What do ya mean "Cars are neither Trucks or Construction"?
It's still scale, and i play fairly well with others, most of the time...
Reply With Quote
  #7  
Old 05-27-2017, 10:35 AM
isreal11 isreal11 is offline
Newbie
 
Join Date: May 2017
Posts: 22
isreal11 is on a distinguished road
Default Re: Newbie Custom King Hauler

Quote:
Originally Posted by frizzen View Post
Looks like its coming along great. You're right' the trailer looks much better at 53'.

Would the deck hold better if you glued the planks edge to edge into sections before taping down?
I put a slight curve on the flatbed like the real ones, and the wood and aluminum have a hard time following the curve and staying there. Gluing them together might help. thanks
Reply With Quote
  #8  
Old 06-06-2017, 11:26 AM
isreal11 isreal11 is offline
Newbie
 
Join Date: May 2017
Posts: 22
isreal11 is on a distinguished road
Default Re: Newbie Custom King Hauler



Working on the truck now. I decided to cut off the frame four inches, because it's going to take 40 acres to turn this rig around. Looks much better now... I got the 3d printed c15 cat from exclusive rc, and i like how the motor fits into the hollow of the engine. Plus it's a true 1/14 scale. A lot of guys are using the cast iron norscot model, but that's a 1/10 scale. Plus I was able to still tuck in the steering and gearbox sevos where they belong in the front, which is tough to do with the norscot one. I got the truck going and steering now....need to work on the hood and speakers....
Reply With Quote
  #9  
Old 06-06-2017, 11:34 AM
isreal11 isreal11 is offline
Newbie
 
Join Date: May 2017
Posts: 22
isreal11 is on a distinguished road
Default Re: Newbie Custom King Hauler



I bought this gear shift aluminum template off ebay and hot glued it into my dx6i radio. I think it's a must for this radio because it keeps the servo in a particular gear without you having to worry that the stick will move slightly into the center and switch gears on you in the middle of driving. On the dx6i, the left stick wants to move into the left and right center, but not up and down. With this template the stick has to stay in place without you having to hold it.
Reply With Quote
  #10  
Old 06-07-2017, 01:19 AM
Cossett's Avatar
Cossett Cossett is offline
On Leave
 
Join Date: Aug 2010
Location: Sydney Aus
Posts: 1,383
Cossett is a jewel in the roughCossett is a jewel in the roughCossett is a jewel in the roughCossett is a jewel in the rough
Default Re: Newbie Custom King Hauler

I just used blue tac or foam double sided tape to hold the shift plate in place so it easy to remove at any stage and my thottle is left spring and lights / horn is right stick on the no spring gimbal
__________________
RIP FreddyGearDrive 2-12-59/12-19-11
Love my Kenworths

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote
  #11  
Old 06-08-2017, 01:23 AM
sassgrunt sassgrunt is offline
Newbie
 
Join Date: Dec 2011
Posts: 84
sassgrunt is on a distinguished road
Default Re: Newbie Custom King Hauler

As far as gluing down the wood on the trailer goes; I was building a flat rack for the container trailer and had the same requirement. I found that Gorilla Glue sticks the wood down to the plastic joists, as well as the metal on the side frames. Just be sure to stain the wood before you install it, (if the glue seeps up onto the visible surface, the stain won't cover it very well), and also watch for any glue that seeps up and needs to be wiped off right away. Once it hardens, it's very difficult to remove. -Mike
Reply With Quote
  #12  
Old 11-06-2018, 12:25 PM
isreal11 isreal11 is offline
Newbie
 
Join Date: May 2017
Posts: 22
isreal11 is on a distinguished road
Default Re: Newbie Custom King Hauler

Been working on my truck off and on the last year. Finally coming somewhere. Was supposed to be a father/son project and while my 12yr old was very involved most of the grunt work was done by father, while the son provided moral and company support
Reply With Quote
  #13  
Old 11-06-2018, 12:26 PM
isreal11 isreal11 is offline
Newbie
 
Join Date: May 2017
Posts: 22
isreal11 is on a distinguished road
Default Re: Newbie Custom King Hauler

This is an early stage test run with the finished trailer.

Reply With Quote
  #14  
Old 11-06-2018, 12:28 PM
isreal11 isreal11 is offline
Newbie
 
Join Date: May 2017
Posts: 22
isreal11 is on a distinguished road
Default Re: Newbie Custom King Hauler

Stripping everything and painting it brown. This is the extended frame:

Reply With Quote
  #15  
Old 11-06-2018, 12:30 PM
isreal11 isreal11 is offline
Newbie
 
Join Date: May 2017
Posts: 22
isreal11 is on a distinguished road
Default Re: Newbie Custom King Hauler

the hood proved to be the biggest challenge. I wanted a Peterbilt look and the king hauler didn't cut the mustard. had to cut and re-glue and do things over a couple of times.

Reply With Quote
  #16  
Old 11-06-2018, 12:31 PM
isreal11 isreal11 is offline
Newbie
 
Join Date: May 2017
Posts: 22
isreal11 is on a distinguished road
Default Re: Newbie Custom King Hauler

Finally got it to where I accepted it. Bought a aftermarket bumper to go along with the wide rim fenders.

Reply With Quote
  #17  
Old 11-06-2018, 12:32 PM
isreal11 isreal11 is offline
Newbie
 
Join Date: May 2017
Posts: 22
isreal11 is on a distinguished road
Default Re: Newbie Custom King Hauler

Reply With Quote
  #18  
Old 11-06-2018, 12:36 PM
isreal11 isreal11 is offline
Newbie
 
Join Date: May 2017
Posts: 22
isreal11 is on a distinguished road
Default Re: Newbie Custom King Hauler

Had a bombshell moment when I came up with an idea for the idling option. The motor and weight fit perfectly into the fuel tank. with a little cutting and hot glue, I had it idling like a c16 caterpillar.

Reply With Quote
  #19  
Old 11-06-2018, 12:39 PM
isreal11 isreal11 is offline
Newbie
 
Join Date: May 2017
Posts: 22
isreal11 is on a distinguished road
Default Re: Newbie Custom King Hauler

The hood hinge didnt come out pretty but I got it working with some help from other pages. copper sheets and rods from manards came in handy. Cab firewall was cut from clear plastic container.

Reply With Quote
  #20  
Old 11-06-2018, 12:41 PM
isreal11 isreal11 is offline
Newbie
 
Join Date: May 2017
Posts: 22
isreal11 is on a distinguished road
Default Re: Newbie Custom King Hauler

time for some paint! I have a little 1:50 scale peterbilt and trailer with this color scheme and I really like it. Here goes!
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:50 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.