RC Truck and Construction  

Go Back   RC Truck and Construction > RC Truck's Kings of the Road > Big Boys of the road 4x4/6x6/8x8/10x10 Trucks

Big Boys of the road 4x4/6x6/8x8/10x10 Trucks This forum is for those multiple axle trucks and other vehicles on and off road.


Reply
 
Thread Tools Display Modes
  #1  
Old 03-16-2013, 11:47 AM
YoungGunz's Avatar
YoungGunz YoungGunz is offline
Green Horn
 
Join Date: Jul 2011
Location: Topeka, KS
Posts: 266
YoungGunz is on a distinguished road
Default Chevy 2500 Pickup

Hey guys,

Started this build about a week ago, after collecting parts for quite some time. The truck is 1:10, I was trying to do a 1:14 in the beginning, however, parts for the larger scales is so much easier to work with. Anyways, started off with a cheap Rc body that I got off Ebay and bought and modified a trail finder chassis to go under the body. I'm shooting for a some what realistic stance and height on this one, hopefully I can get something close. Eventually I would like to get a sound unit for this, I think a diesel would be pretty neat.

Here is where I'm at now with the build:

Here is the modified chassis. Had to cut off an inch or two off the end, and move the rear axle up about the same. Since the original chassis has so much flex in the suspension, I decided to put some small shocks on it to restrict the travel, but still give it some articulation.









After getting the stance about right, I couldnt stand the look of the bed of the truck. It had the molding from a roll bar that was on it previously, so I went ahead and cut it out and began to make a new one from styrene. I'm just waiting for the putty to dry now so I can get to sanding it down.









Thats where I'm at now, should have some more tonight. Thanks for looking and suggestions are more than welcome!
__________________
-J.D.
Reply With Quote
  #2  
Old 03-16-2013, 12:05 PM
DaBomb6988 DaBomb6988 is offline
Newbie
 
Join Date: Feb 2013
Location: Lake George, NY
Posts: 60
DaBomb6988 is on a distinguished road
Default Re: Chevy 2500 Pickup

Looks good! Keep up the good work
Reply With Quote
  #3  
Old 03-16-2013, 01:22 PM
Snochaser's Avatar
Snochaser Snochaser is offline
Craftsman
 
Join Date: Aug 2010
Location: Southwest Ohio
Posts: 929
Snochaser will become famous soon enoughSnochaser will become famous soon enough
Default Re: Chevy 2500 Pickup

Nice, J.D.! The right manufacturer too. The stance is right on. What about a headache rack, fuel tanks and tool box? It would give it the work truck look. Keep it up!

Ben
__________________
You are an inspiration to many
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
, you will not be forgotten.
R.I.P. FGD

Work Hard, Play Hard!
Never Forget- 343
Reply With Quote
  #4  
Old 03-16-2013, 06:13 PM
YoungGunz's Avatar
YoungGunz YoungGunz is offline
Green Horn
 
Join Date: Jul 2011
Location: Topeka, KS
Posts: 266
YoungGunz is on a distinguished road
Default Re: Chevy 2500 Pickup

Quote:
Originally Posted by DaBomb6988 View Post
Looks good! Keep up the good work
Thanks!

Quote:
Originally Posted by Snochaser View Post
Nice, J.D.! The right manufacturer too. The stance is right on. What about a headache rack, fuel tanks and tool box? It would give it the work truck look. Keep it up!

Ben
Thanks Ben! I have the tool box down, but I dont know about the other two


Basically finished the body and rolling chassis. The body work is no where near perfect but its a work truck so it wont matter. Now I have to wait for the motor and ESC to get here, then possibly some sound I still need to finish the tail gate but that is no big deal and can be done whenever. The next step on this build is to build a after market tow package. I think I will build it from brass or I might try out the one from Rc4wd first and see if it works.... Here are some more pictures. I also put it next to my Pete for a size reference Sorry about some of the pictures.... they didnt turn out too well....

















Thanks for looking!
__________________
-J.D.
Reply With Quote
  #5  
Old 03-16-2013, 08:52 PM
Bigrigger's Avatar
Bigrigger Bigrigger is offline
Journeyman
 
Join Date: Aug 2010
Location: The beach.
Posts: 564
Bigrigger is on a distinguished road
Default Re: Chevy 2500 Pickup

That is one cool truck! Projects like this are really cool; turning bits into a sweet ride!
__________________
-Chris
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote
  #6  
Old 03-17-2013, 06:54 AM
YoungGunz's Avatar
YoungGunz YoungGunz is offline
Green Horn
 
Join Date: Jul 2011
Location: Topeka, KS
Posts: 266
YoungGunz is on a distinguished road
Default Re: Chevy 2500 Pickup

Quote:
Originally Posted by Bigrigger View Post
That is one cool truck! Projects like this are really cool; turning bits into a sweet ride!
Thanks for the compliment! I had this body sitting around for months. Then I bought the axles and they sat together for a few more months haha
__________________
-J.D.
Reply With Quote
  #7  
Old 03-17-2013, 08:19 AM
speedy8305 speedy8305 is offline
Apprentice
 
Join Date: Aug 2012
Location: Port Wentworth, GA
Posts: 408
speedy8305 is on a distinguished road
Default Re: Chevy 2500 Pickup

Here is just an idea why dont you make the sweet 1500 match that sweet truck of yours good work
Reply With Quote
  #8  
Old 03-17-2013, 03:43 PM
YoungGunz's Avatar
YoungGunz YoungGunz is offline
Green Horn
 
Join Date: Jul 2011
Location: Topeka, KS
Posts: 266
YoungGunz is on a distinguished road
Default Re: Chevy 2500 Pickup

Quote:
Originally Posted by speedy8305 View Post
Here is just an idea why dont you make the sweet 1500 match that sweet truck of yours good work
Thats a good idea! I might look into pin striping some yellow down the side. Maybe I should make black and yellow my fleet colors
__________________
-J.D.
Reply With Quote
  #9  
Old 03-17-2013, 05:01 PM
rockNmayhem's Avatar
rockNmayhem rockNmayhem is offline
Journeyman
 
Join Date: Feb 2011
Location: Kansas
Posts: 583
rockNmayhem is on a distinguished road
Default Re: Chevy 2500 Pickup

JD that truck looks great. It looks like a quick build and lots of fun. Now it's time to get it dirty.

Tyler
__________________
~Tyler~
RockSolidCustoms
Reply With Quote
  #10  
Old 03-20-2013, 01:38 PM
DaBomb6988 DaBomb6988 is offline
Newbie
 
Join Date: Feb 2013
Location: Lake George, NY
Posts: 60
DaBomb6988 is on a distinguished road
Default Re: Chevy 2500 Pickup

Very nice trucks.
Reply With Quote
  #11  
Old 03-21-2013, 12:44 AM
rcman rcman is offline
Green Horn
 
Join Date: Feb 2011
Location: Wendell, N.C.
Posts: 244
rcman is on a distinguished road
Default Re: Chevy 2500 Pickup

nice trucks. you did a great job on the bed
Reply With Quote
  #12  
Old 03-27-2013, 05:50 PM
YoungGunz's Avatar
YoungGunz YoungGunz is offline
Green Horn
 
Join Date: Jul 2011
Location: Topeka, KS
Posts: 266
YoungGunz is on a distinguished road
Default Re: Chevy 2500 Pickup

Quote:
Originally Posted by DaBomb6988 View Post
Very nice trucks.
Quote:
Originally Posted by rcman View Post
nice trucks. you did a great job on the bed
Thanks guys!

Have a bit of an update. Nothing has actually been done to the truck yet, but I started designing something new and will use my new piece of equipment that I bought for my birthday to build it

Here is just the start of what I'm building but its far enough to tell what it is. haha Since I work for a snow removal company I thought it would be pretty neat to make a miniature Western snowplow. I'm not replicating a single plow, this one is a bit of a hybrid between a few plows that we run. It would be extremely hard to replicate the mounting system on the new plows, so it will be similar to the older style mounts. The rest of the plow should be pretty close, however, I wont be using hydraulics. I'm going to use a winch for practical purposes, and a servo to turn the plow. Hopefully you guys like it!


Here is the plow assembly as it sits now:



Here is the plow mounting kit that I designed to fit on the pick up:



Here is the new piece of equipment





I figured why not? I've watched the KW body attempt and thought it was pretty awesome so I thought i would give it a try. The Afinia unit is very user friendly and I have had no problems this far.

Thanks for looking
__________________
-J.D.
Reply With Quote
  #13  
Old 03-28-2013, 02:47 AM
TRUCKMAKER's Avatar
TRUCKMAKER TRUCKMAKER is offline
Big Dawg On The Bone
 
Join Date: Aug 2011
Posts: 1,652
TRUCKMAKER is on a distinguished road
Default Re: Chevy 2500 Pickup

The truck turned out nice JD, but this going to be fun watching this plow "grow", and it will be neat on the truck! Keep posting updates!
Reply With Quote
  #14  
Old 03-28-2013, 12:36 PM
Radio Control Trucker's Avatar
Radio Control Trucker Radio Control Trucker is offline
Journeyman
 
Join Date: Jun 2011
Location: Riverside County, CA
Posts: 746
Radio Control Trucker is on a distinguished road
Thumbs up Re: Chevy 2500 Pickup

That's pretty AWESOME

Post pic's as you go, JD

I like the truck. Any other plans to modify the truck?

- RCT
__________________
WCMT Director -
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

"Keep the Shiny-side Up, the Dirty-side Down & Keep 'er to the Line."
Reply With Quote
  #15  
Old 03-29-2013, 12:24 AM
rcman rcman is offline
Green Horn
 
Join Date: Feb 2011
Location: Wendell, N.C.
Posts: 244
rcman is on a distinguished road
Default Re: Chevy 2500 Pickup

truck turned out great! love the 3D printer! very cool...
Reply With Quote
  #16  
Old 04-01-2013, 02:35 PM
YoungGunz's Avatar
YoungGunz YoungGunz is offline
Green Horn
 
Join Date: Jul 2011
Location: Topeka, KS
Posts: 266
YoungGunz is on a distinguished road
Default Re: Chevy 2500 Pickup

Quote:
Originally Posted by TRUCKMAKER View Post
The truck turned out nice JD, but this going to be fun watching this plow "grow", and it will be neat on the truck! Keep posting updates!
Quote:
Originally Posted by Radio Control Trucker View Post
That's pretty AWESOME

Post pic's as you go, JD

I like the truck. Any other plans to modify the truck?

- RCT
Quote:
Originally Posted by rcman View Post
truck turned out great! love the 3D printer! very cool...
Thanks Guys!

Have a bit of an update today... Mounted the snow plow mount and the adapter for the tow package. Going to rework the tow package so it sits snug to the bottom of the bumper. Here are some pictures:









__________________
-J.D.
Reply With Quote
  #17  
Old 04-02-2013, 09:57 AM
Snochaser's Avatar
Snochaser Snochaser is offline
Craftsman
 
Join Date: Aug 2010
Location: Southwest Ohio
Posts: 929
Snochaser will become famous soon enoughSnochaser will become famous soon enough
Default Re: Chevy 2500 Pickup

Nice job J.D., lets see the plow now.
__________________
You are an inspiration to many
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
, you will not be forgotten.
R.I.P. FGD

Work Hard, Play Hard!
Never Forget- 343
Reply With Quote
  #18  
Old 04-07-2013, 12:54 PM
YoungGunz's Avatar
YoungGunz YoungGunz is offline
Green Horn
 
Join Date: Jul 2011
Location: Topeka, KS
Posts: 266
YoungGunz is on a distinguished road
Default Re: Chevy 2500 Pickup

Quote:
Originally Posted by Snochaser View Post
Nice job J.D., lets see the plow now.
Thanks Ben! No plow yet, but have some more progress.

Have the winch and light carriage done. took 3 tries to get it perfect. Here are some pictures. Next will be the plow articulation and plow roll over mechanics. Waiting on a package from servo city with a bunch of 2-56 bolts and a servo to make some more progress







__________________
-J.D.
Reply With Quote
  #19  
Old 04-13-2013, 09:27 PM
YoungGunz's Avatar
YoungGunz YoungGunz is offline
Green Horn
 
Join Date: Jul 2011
Location: Topeka, KS
Posts: 266
YoungGunz is on a distinguished road
Default Re: Chevy 2500 Pickup

Have another update for you guys. Was able to get the main plow support made about a week ago and last night I printed the roll and pivot pieces. Also did some brass work to pull it all together. Got a video of it functioning

VIDEO:













Thanks for looking!
__________________
-J.D.
Reply With Quote
  #20  
Old 04-14-2013, 12:26 AM
doodlebug's Avatar
doodlebug doodlebug is offline
Big Dawg On The Bone
 
Join Date: Dec 2010
Location: South 40 Swamp, Utah
Posts: 2,398
doodlebug is on a distinguished road
Default Re: Chevy 2500 Pickup

Wow, that's an impressive snow plow! I would like to play with 3d printing someday.
Cheer's, Neil.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:13 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.