Flame Thrower Kit Wanted !!!

[RacerX43]

Hey Guys,

Does anyone know of a Flame Thrower Kit made for these Trucks that can shoot Flames out of the Stacks ? Has anyone made one, or know if there is a kit ? If you know, or know how to make one, please let me know.

Thank you,
Robby

[rc_farmer]

IMO, I don't think you are going to get any responces to your question of a flame throwing kit on this board. The abilitly for someone to take any information of that sort and use it for the unintended purposes, poses too much of a potential liability to the poster and to the sponsor/s of this board and forum.

[rc_farmer]

Originally Posted by rc_farmer

IMO, I don't think you are going to get any responces to your question of a flame throwing kit on this board. The abilitly for someone to take any information of that sort and use it for the unintended purposes, poses too much of a potential liability to the poster and to the sponsor/s of this board and forum.

Let me be clearer by saying i meant the posting of instructions on here on how to build one.....

[FlyingBeagle]

I have never built one of these, but if it were me I would start by trying to install the guts from a grill lighter into the stacks. The hard part would be getting it to operate remotely.

[ihbuilder]

there's no kit available to my knowledge . It's not hard to make ,but you need to know what your doing . while it may be cool a burnt down house is not . Donny only lights up in the open and I doubt he's allowed to at Indy at all .

[Smokin Joe]

Originally Posted by ihbuilder

there's no kit available to my knowledge . It's not hard to make ,but you need to know what your doing . while it may be cool a burnt down house is not . Donny only lights up in the open and I doubt he's allowed to at Indy at all .

You are so right Steve. Some one told me years ago, "If you don't know what it does, don't mess with it".

[wingnut163]

there is a yellow truck on this form that has flame coming out of its stacks.

[wingnut163]

its in the club post east coast truckers

http://www.rctruckandconstruction.co...ead.php?t=5426

its after the rig on the scales with the wire rolls on it.

[Claus]

Hmmm, strange.

[bigford]

Were all ADULTS HERE!!!!!!!!! DO NOT TRY AT HOME!!!!!!
you need a 25 pound propane tank, two spark plugs, extra long plug wire
something to make the spark, Straight pipes oh ya a way to release the propane.
My buddies Pete is rigged into the Jake brake high setting. As the Jake kicks in
the valve lets out some propane and the spark plugs start sparking about half way up
the pipes and out comes the blue blow torch looking flame............

Now this works real well for a REAL PETERBILT NOT for a 1/14 TOY
DO NOT TRY yourself you will just hurt your self or worse others around you

[sandfarmer]

Oh my! I'd love to see pics or video of the 1:1 doing that! I bet it gets peoples attention when the Jake sound is accompanied by flame LOL!

[Supermario]

Especially at about 11pm and within city limits

Mario

[bigford]

ill see what i can do. The rig is a 2000 mechanical pete turned up.
the tank is in a tool box on the rear deck inbetween the stacks
with the lines plumbed into the elbows of the stacks