|
Construction Equipment If it digs, pushes, hauls dirt "off road" post it here. |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
140H Grader...Unpdate
I am back on the grader. Here are a few pics. This is going to be a full function grader. For the controls, i will utilize a combination of air and hydraulics.....too many features to run full hydraulics. Steering will run off hydraulics and some of the blade/moldboard features. Ripper will be air. I have started "some" paint, but i have a long ways to go. I have completely changed the body of the grader. I like the hulky look of the square-back of the 140H instead of the slanted. The saddle tanks are about to primer and paint.
Enjoy,
__________________
Giving up is not an option!!! Rob Last edited by rc_farmer; 09-29-2010 at 10:23 PM. |
#2
|
||||
|
||||
Re: 140H Grader
How are you going to synchronize all 4 drive motors and be able to steer? Wasn't there a discussion about that recently? How many channels will be needed to operate a grader like this?
|
#3
|
||||
|
||||
Re: 140H Grader
I think using the "dual motor mix" with the Sabertooth might work to help it steer, as long as you're moving forward. Have you used a Sabertooth dual esc with a tracked model before Rob?
I think there's about 8 or9 hyd functions within a grader Steve... D9 Joe would know. |
#4
|
||||
|
||||
Re: 140H Grader
Nice build
The four motors for the drive system is the way to go for sure, that is what I did for my ADT. Did you happen to put drive motors in the front steering wheels, it would sure help with the traction and also steering. greg |
#5
|
|||
|
|||
Re: 140H Grader
Hey Rob looking good. I remember seeing this before but for got about it mice work keep it up. Ed
|
#6
|
||||
|
||||
Re: 140H Grader
Thanks guys for all the compliments.
I am using the Sabertooth ESC I am not powering the front wheels. As for the channels......whew! f/rv, steering, body swival, wheel tilt, ripper, moldboard up/dn, blade swival, blade tilt, lights, just to name a few. I am going to run hydraulics on the steering and on the moldboard. I am using air on the ripper......and figure out the rest on the fly. There are not enough channels or switches on any radio to properly run all the function on a grader......that i am aware of. Still have a lot of work to do.
__________________
Giving up is not an option!!! Rob |
#7
|
||||
|
||||
Re: 140H Grader
What a beast! It sure looks big compared to the 1/64 scale model. Glad to see you are moving forward with this project, Rob. Looking good.
__________________
Nathan |
#8
|
||||
|
||||
Re: 140H Grader
Here are some new pics of the saddle gas tanks.
__________________
Giving up is not an option!!! Rob |
#9
|
||||
|
||||
Re: 140H Grader
Is that styrene and wood on the saddle tanks? is there some kind of advantage to doing it that way?
They look neat though. |
#10
|
|||
|
|||
Re: 140H Grader
looking good!!!
__________________
LARRY,the doggy dish dealer |
#11
|
||||
|
||||
Re: 140H Grader
Looks great! What a cool model.
Are those Tamiya giant dump truck wheels & tires?
__________________
Scott "No load is too Small" |
#12
|
||||
|
||||
Re: 140H Grader
Looking good Rob, I'm glad your back on this build.
__________________
Joe |
#13
|
|||
|
|||
Re: 140H Grader
Jammer said he found a radio that had 22 channels on it that should be plenty lol it is in his excavator thread i think
__________________
I built this thing and have it working now what do I do with it? |
#14
|
||||
|
||||
Re: 140H Grader
Wow Robbert glad to see you back at it and them rims you were not joking your buddy knocked them out very very nice..
__________________
Paul W. "Tamiya Cowboy" HI.. My name is Paul.. And.. I.. Have a Cabover Addiction. RIP FreddyGearDrive 2-12-59/12-19-11 "LET IT EAT" Like Us on Facebook "Corn Field Mafia" To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#15
|
||||
|
||||
Re: 140H Grader
Blender, the advantage for me is the simple build with not having to build a mold. I would prefer to vaccuum form the parts, but don't have the resources. I carved the piece from a block of balsa.
Ed mentioned to me about the radio, but need a bunch of 3-pos switches. the grader has a lot of 3-pos levers for the up/dn and sideways motions. I need to get the wheels sandblasted then powder coated those are mommoth dump trk wheels
__________________
Giving up is not an option!!! Rob |
#16
|
||||
|
||||
Re: 140H Grader Updates
Well, i was able to get the patterns of the moldboard done and sent off to the waterjet. Got'm back yesterday.....and after drilling and tapping all the parts, this is how it looks.
Spent 2 1/2 hrs at the dentist this a.m. and finallyfelt like working on the grade some more tonight. Got the cylinders positioned and now i need to make the swing arms for them.
__________________
Giving up is not an option!!! Rob |
#17
|
||||
|
||||
Re: 140H Grader
Are those tires hard to get? Can you hold a rule up to them?
|
#18
|
||||
|
||||
Re: 140H Grader
Quote:
Wow Rob another piece of art as I expect from a master IHSteve
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#19
|
||||
|
||||
Re: 140H Grader
Rob, that is incredible! This has got to be a first. I like the jack stand too!
Brian |
#20
|
|||
|
|||
Re: 140H Grader
Very nice work! Lot's of small parts. This looks like a hard build but is coming along great!
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|